Omega CL3512A specifications Operator Maintenance, Specifications, Battery Replacement

Page 7

3.0 Operator Maintenance

WARNING

To avoid possible electrical shock, disconnect the thermocouple connectors from the thermometer before removing the cover.

Battery Replacement

Power is supplied by a 9 volt “transistor” battery. The “” appears on the LCD display when replacement is needed. To replace the battery, remove the two screws from the back of the meter and lift off the battery cover. Remove the battery from battery contacts.

9

4.0 Specifications

ELECTRICAL

Temperature Scale: Celsius or Fahrenheit user-selectable

Measurement Range:

 

Thermocouple

Range

K-TYPE(0.1°C)

-200°C to 1372°C, -328°F to 1999°F

J-TYPE(0.1°C)

-210°C to 1200°C, -346°F to 1999°F

T-TYPE(0.1°C)

-200°C to 400°C , -328°F to 752°F

E-TYPE(0.1°C)

-220°C to 1000°C, -364°F to 1832°F

Calibration Range: -210°C to 1372°C, (-364°F to 1999°F)

Auto range: 0.1°C/1°C, 0.1°F/1°F

Accuracy: Accuracy is specified for operating temperatures over the range of18°C to 28°C (64°F to 82°F), for 1 year, not incl uding thermocouple error.(Read mode)

±(0.1%rdg + 1°C) range -60°C to 1372°C ±(0.1%rdg + 2°C) range -60°C to -220°C ±(0.1%rdg + 2°F) range -76°F to 1999°F ±(0.1%rdg + 4°F) range -76°F to -364°F

Simulation Accuracy: Measurement accuracy plus 1°C

ENVIRONMENTAL

Ambient Operating Ranges: 0°C to 50°C (32°F to 122°F) <80% R.H.

Storage Temperature: -20°C to 60°C (-4°F to 140°F) <70% R.H.

10

Image 7
Contents CL3512A Table of contents Introduction Safety InformationUnpacking Descriptions of Buttons and Switches Operation ProcedureDrawing of Unit Input Selections Read Mode ProcedureSelector Switch AdjustSource Mode Procedure Calibration Simulation Measurement Range Thermocouple Operator MaintenanceSpecifications Battery ReplacementMeasurement rate 1 times/second CL3152A Calibration ProcedurePage 3806/0610