Panasonic WV-CW504SK, WV-CW504FK manual Electronic shutter setting Shutter, Mask setting screen

Page 11

"ALC CONT" screen

**ALC CONT**(1)

BACK LIGHT COMP

SUPER-D5 OFF

MASK SET

LEVEL ...... 0

- +

MANUAL ABS

RET TOP END

Mask setting screen

 

Area setting screen

 

 

 

 

 

 

 

 

 

**AREA

**(1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PUSH SW

 

 

 

 

 

 

 

 

 

POSITION

 

 

 

 

 

 

 

 

 

 

 

 

 

UPPER LEFT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RET TOP END

 

 

 

 

Step 2

Mask bright areas.

Use the up, down, right, and left buttons to select an area to be masked and press the setting button. When the selected area is masked, the masked area will start blinking (between stripes and white screen). When selecting another area after masking, the masked area will be edisplayed in white. Repeat the above procedure to mask other areas as necessary.

Note:

•To cancel the masking, select the masked area to be canceled, and then press the setting button.

•To cancel all the masking, hold down the right and left buttons for more than 2 seconds simultaneously.

Step 3

Hold down the setting button for more than 2 seconds simultaneously after completion of masking.

→The "ALC CONT" or "ALC+ CONT" screen appears again.

Step 4

Move the cursor to "LEVEL" and use the right or left button to adjust the level.

Step 5

The dark area of the object is automatically corrected to lighten it.

Move the cursor to "MANUAL ABS" and press the setting button.

→The area setting screen appears.

Step 6

Move the cursor to "POSITION" and press the setting button to select an area.

The setup procedure is the same as the setting operation in the process of SUPER-D5 function. (+ Steps 4 - 5 on page 10)

3. Electronic shutter setting [SHUTTER]

The variation in electronic shutter speed allows users to perform the following.

•Increased shutter speed prevents blurring fast-moving subjects.

•If flicker is observed under fluorescent lighting of 50 Hz, selection of "1/100" for the speed can reduce flicker.

The electronic shutter speed is selectable from the following: The setting of the SUPER-D5 function restricts the available setting range.

When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and 1/10 000

When the SUPER-D5 function is set to "ON" or "ON(i-VMD)": OFF (1/60) (default), 1/100

Note:

•When "ALC" is set to "ALC+" (+ page 9), "---" appears and the electronic shutter function cannot be activated.

•If the controller, WV-CU254 or WV-CU204 is used, SW LED and the status of "SHUTTER" are not correctly displayed.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operating Instructions Trademarks and registered trademarks PrefaceContents Setup item Description Reference Pages About the setup menusStep Basic operationScreen transition diagram Display positioning screen Camera title setting Camera IDCamera ID screen Top screenRegister a scene file SCENE1/SCENE2 Screen when SCENE1 is selectedScreen when SCENE2 is selected Light quantity control method selection ALC SUPER-D5 settingCamera Setup screen ALC Cont screen Area setting screenWhen not using the SUPER-D5 function When using the SUPER-D5 functionMask setting screen Electronic shutter setting ShutterWhite balance setting White BAL Gain control setting AGCElectronic sensitivity enhancement setting Sens UP Fine adjustment screen Manual fine adjustment of white balanceCamera Setup screen Camera Setup screen BW Mode screen Digital noise reduction function setting DNRBlack-and-white mode setting BW Mode VMD setting i-VMD Detect objects that move into the specified direction Perform the settings relating to the motion detectionDetect motion of objects Set the minimum size of objects detected Set the detection sensitivityMotion DET screen Object DET screen Set the detection areasCamera Setup screen VMD Setup screen Setting of scene change detectionConfigure alarm notification Configure frame displaySynchronization method selection Sync Camera system setting System SetupSetting of the power supply synchronization LL mode Follow the procedure below System Setup screen Sync screenZone setting screen Automatic adjustments of the focus LensPrivacy zone setting Privacy Zone Image stabilizer setting Stabilizer Pan/tilt setting screen Electronic zoom setting EL-ZOOMDisplay setting of vertical or horizonal flip UPSIDE-DOWN Back focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Pedestal level adjustment Pedestal Special menu setting Special SetupChroma level adjustment Chroma Gain Aperture level adjustment AP GainSerial number viewing SER.NO Default resetting Camera ResetSpecial Setup screen PIX OFF screen Flaw compensation PIX OFFLanguage selection Language Setup Shortcut operation System controller operation Setting contentsSystem controller operation Setting contents Panasonic Sales Company Panasonic System Solutions CompanyPanasonic Canada Inc
Related manuals
Manual 44 pages 27.27 Kb

WV-CW504SK, WV-CW504S, WV-CW504F, WV-CW504FK specifications

Panasonic’s range of WV-CW504 series network cameras, including models WV-CW504FK, WV-CW504F, WV-CW504S, and WV-CW504SK, epitomizes advanced security technology tailored for both indoor and outdoor surveillance applications. These cameras are designed to provide high-definition video quality alongside a range of features that enhance usability and security, making them ideal for various environments, from retail to public spaces.

One of the standout features of the WV-CW504 series is its exceptional image quality, with a resolution of up to 1080p. This ensures crystal-clear video capture, even in challenging lighting conditions, thanks to the integration of advanced image processing technologies. The cameras are equipped with Wide Dynamic Range (WDR) technology, which balances exposure levels to ensure that both bright and dark areas of the scene are visible.

Panasonic's WV-CW504 models come with a built-in motorized zoom lens that allows users to remotely adjust the field of view without having to physically reposition the camera. This feature is crucial for applications where flexibility in monitoring specific areas is necessary. Additionally, the cameras support various viewing angles, which can be critical for comprehensive coverage in various environments.

In terms of connectivity, these network cameras support Power over Ethernet (PoE), allowing for easier installation as they can receive power and data through a single cable. This significantly reduces installation costs and complexities, making these cameras an attractive choice for both new installations and upgrades to existing systems.

The WV-CW504 series also integrates advanced video analytics features, such as motion detection and tampering detection. These functionalities help optimize security monitoring by alerting users to unusual activity and allowing for a more proactive approach to surveillance management. Furthermore, the cameras support ONVIF compliance, ensuring compatibility with a wide range of network video recorders and third-party software.

With robust weatherproof and vandal-resistant ratings, particularly in models meant for outdoor use, the WV-CW504 series ensures reliable performance in various environmental conditions. The sleek design of these cameras also allows them to blend seamlessly into any interior or exterior space, enhancing security without compromising aesthetics.

In conclusion, the Panasonic WV-CW504FK, WV-CW504F, WV-CW504S, and WV-CW504SK network cameras offer a powerful combination of high-definition imaging, versatile installation options, and intelligent surveillance features, making them an excellent choice for ensuring the safety and security of any environment.
Top Page Image Contents