Panasonic WV-CW504FK, WV-CW504SK manual Basic operation, Step

Page 5

Basic operation

The description below explains how to operate the setup menu basically.

The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. Refer to the installation guide for further information about the operation buttons.

The operations in the setup menu can also be performed through the system controller (option).

Screenshot 1

Hold down the setting button for more than 2 simultaneously seconds to call up the top screen of the setup menu.

MODEL WV-CW504

CAMERA ID OFF

CAMERA

SYSTEM

BACK-FOCUS

SPECIAL

LANGUAGE

Step 1

Press the up or down button to move the cursor to "END".

Step 2

Press the right button to move the cursor to "SETUP", and press the setting button to change the setup mode from "DISABLE" to "ENABLE".

END SETUP DISABLE

Screenshot 2

The setup mode changes to "ENABLE", and the setup menu becomes ready to be set.

MODEL WV-CW504

CAMERA ID OFF

CAMERA

SYSTEM

BACK-FOCUS

SPECIAL

LANGUAGE

END SETUP ENABLE

Screenshot 3

The selected setup screen in the setup menu appears on the screen.

**CAMERA SETUP**

SCENE1

 

 

 

ALC

 

 

 

 

 

 

ALC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHUTTER

OFF

AGC

ON(HIGH)

SENS UP

OFF

WHITE BAL

ATW1

 

 

 

 

DNR

HIGH

BW MODE

AUTO1

 

 

 

i-VMD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RET TOP END

 

 

 

 

 

 

 

Note:

•If the top screen of the setup menu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to prevent operation errors.

To configure the settings in the setup menu, change the setup mode to "ENABLE".

•The cursor is a reversely highlighted part.

Step 3

Move the cursor to the item to be set, and press the setting button.

Step 4

Perform the settings for each item.

•Selection of setting item:

Press the up or down button to move the cursor.

•Change of settings:

Press the right or left button.

•Display of advanced setup screen:

Press the setting button when "O" is attached to the tar- get setting item.

•Return to previous setup screen:

Move the cursor to "RET" and press the setting button.

•Return to the top screen:

Move the cursor to "TOP" and press the setting button.

Step 5

To return to the camera image screen, move the cursor to "END" and press the setting button.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating Instructions Trademarks and registered trademarks PrefaceContents Setup item Description Reference Pages About the setup menusStep Basic operationScreen transition diagram Camera ID screen Camera title setting Camera IDTop screen Display positioning screenRegister a scene file SCENE1/SCENE2 Screen when SCENE1 is selectedScreen when SCENE2 is selected Camera Setup screen ALC Cont screen SUPER-D5 settingArea setting screen Light quantity control method selection ALCWhen not using the SUPER-D5 function When using the SUPER-D5 functionMask setting screen Electronic shutter setting ShutterWhite balance setting White BAL Gain control setting AGCElectronic sensitivity enhancement setting Sens UP Fine adjustment screen Manual fine adjustment of white balanceCamera Setup screen Camera Setup screen BW Mode screen Digital noise reduction function setting DNRBlack-and-white mode setting BW Mode VMD setting i-VMD Detect objects that move into the specified direction Perform the settings relating to the motion detectionDetect motion of objects Set the minimum size of objects detected Set the detection sensitivityMotion DET screen Object DET screen Set the detection areasCamera Setup screen VMD Setup screen Setting of scene change detectionConfigure alarm notification Configure frame displaySetting of the power supply synchronization LL mode Camera system setting System SetupFollow the procedure below System Setup screen Sync screen Synchronization method selection SyncZone setting screen Automatic adjustments of the focus LensPrivacy zone setting Privacy Zone Image stabilizer setting Stabilizer Pan/tilt setting screen Electronic zoom setting EL-ZOOMDisplay setting of vertical or horizonal flip UPSIDE-DOWN Back focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Chroma level adjustment Chroma Gain Special menu setting Special SetupAperture level adjustment AP Gain Pedestal level adjustment PedestalSpecial Setup screen PIX OFF screen Default resetting Camera ResetFlaw compensation PIX OFF Serial number viewing SER.NOLanguage selection Language Setup Shortcut operation System controller operation Setting contentsSystem controller operation Setting contents Panasonic Sales Company Panasonic System Solutions CompanyPanasonic Canada Inc
Related manuals
Manual 44 pages 27.27 Kb

WV-CW504SK, WV-CW504S, WV-CW504F, WV-CW504FK specifications

Panasonic’s range of WV-CW504 series network cameras, including models WV-CW504FK, WV-CW504F, WV-CW504S, and WV-CW504SK, epitomizes advanced security technology tailored for both indoor and outdoor surveillance applications. These cameras are designed to provide high-definition video quality alongside a range of features that enhance usability and security, making them ideal for various environments, from retail to public spaces.

One of the standout features of the WV-CW504 series is its exceptional image quality, with a resolution of up to 1080p. This ensures crystal-clear video capture, even in challenging lighting conditions, thanks to the integration of advanced image processing technologies. The cameras are equipped with Wide Dynamic Range (WDR) technology, which balances exposure levels to ensure that both bright and dark areas of the scene are visible.

Panasonic's WV-CW504 models come with a built-in motorized zoom lens that allows users to remotely adjust the field of view without having to physically reposition the camera. This feature is crucial for applications where flexibility in monitoring specific areas is necessary. Additionally, the cameras support various viewing angles, which can be critical for comprehensive coverage in various environments.

In terms of connectivity, these network cameras support Power over Ethernet (PoE), allowing for easier installation as they can receive power and data through a single cable. This significantly reduces installation costs and complexities, making these cameras an attractive choice for both new installations and upgrades to existing systems.

The WV-CW504 series also integrates advanced video analytics features, such as motion detection and tampering detection. These functionalities help optimize security monitoring by alerting users to unusual activity and allowing for a more proactive approach to surveillance management. Furthermore, the cameras support ONVIF compliance, ensuring compatibility with a wide range of network video recorders and third-party software.

With robust weatherproof and vandal-resistant ratings, particularly in models meant for outdoor use, the WV-CW504 series ensures reliable performance in various environmental conditions. The sleek design of these cameras also allows them to blend seamlessly into any interior or exterior space, enhancing security without compromising aesthetics.

In conclusion, the Panasonic WV-CW504FK, WV-CW504F, WV-CW504S, and WV-CW504SK network cameras offer a powerful combination of high-definition imaging, versatile installation options, and intelligent surveillance features, making them an excellent choice for ensuring the safety and security of any environment.
Top Page Image Contents