Panasonic WV-CW504FK, WV-CW504S Manual fine adjustment of white balance, Camera Setup screen

When "AWC" is selected, follow the steps below to adjust the white balance.

"CAMERA SETUP" screen

**CAMERA SETUP**

SCENE1
ALC	ALC
SHUTTER	OFF
AGC	ON(HIGH)
SENS UP	OFF
WHITE BAL	AWC	PUSH SW
DNR	HIGH
BW MODE	AUTO1
i-VMD
RET TOP END

Step 1

Set "WHITE BAL" to "AWC" and press the left button to change to "AWC → PUSH SW".

Step 2

Press the setting button and adjust the white balance.

"PUSH SW" is reversely highlighted during adjustment. When the reversely highlighted display is restored, the white balance adjust- ment is completed.

Step 3

Press the right button to select "AWC".

Refer to the following for fine adjustment of the white balance.

Note:

•The adjustment of the color temperature ranges from approx. 2 000 K to 10 000 K. If the correct range is out of this adjustment range or lighting directed to a subject is too dark, the white balance may not completely adjusted. In such a case, "PUSH SW" stays reversely highlighted.

Manual fine adjustment of white balance

The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC).

Follow the procedure below.

"CAMERA SETUP" screen		Fine adjustment screen
**CAMERA SETUP**			**ATW1**(1)
SCENE1		R				0
ALC	ALC			......
SHUTTER	OFF			-	+
AGC	ON(HIGH)	B	...... 0
SENS UP	OFF
WHITE BAL	ATW1		-		+
DNR	HIGH
BW MODE	AUTO1
i-VMD			RET TOP END
RET TOP END

Step 1

Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the setting button.

→The fine adjustment screen appears.

Step 2

Move the cursor to "R" and "B" and use the right or left button to fine adjust the level for each.

When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–" direc- tion, the color becomes lighter.

13