Troubleshooting Tag Dispenser problems
The tag dispenser switch controls the motor used to advance tags to the feeder opening on the top of the Conversion Station.
The tag dispenser switch has three positions:
ON (up) position
OFF (middle) position
JOG (down) position
Switch
|
|
| |
|
|
|
|
| Problem |
| Solution |
| The motor stops before a |
| Turn the tag dispenser switch to the OFF (middle) position and then to the ON |
| tag advances into the |
| (up) position. A tag should advance through the tag feeder opening and into |
| correct position above the |
| the correct position. |
| tag feeder opening, |
|
|
|
|
|
|
| A tag jams below the |
| 1 Go inside the Conversion Station cabinet and clear the jammed tag. |
| surface of the tag feeder |
| |
|
|
| |
| opening, |
| 2 Turn the tag dispenser switch to the OFF (middle) position and then to the |
|
|
| |
|
|
| ON (up) position. |
|
|
| A tag should advance through the tag feeder opening and into the correct |
|
|
| position. |
| A tag appears in or slightly |
| Turn the tag dispenser switch to the JOG (down) position as many times as |
| above the tag feeder |
| necessary to advance or “jog” the tag into the correct position. |
| opening but you cannot |
|
|
| peel off the tag |
|
|
|
|
|
|
12