Specifications
Shipping Size
| Height | 47.5 inches [1207mm] |
|
|
|
| Width | 42.5 inches [1080mm] |
|
|
|
| Depth | 30.0 inches [762mm] |
|
|
|
| Weight | 338 lbs. [154 kg] |
|
|
|
| Model 711/ 811 |
|
| Height | 55.25 in. [1403mm] |
|
|
|
| Width | 30.0 in. [762mm] |
|
|
|
| Depth | 18.0 in. [457mm] |
|
|
|
| Weight | 150 lbs. [68.2 kg] |
|
|
|
| Operating and Storage Temperature | |
| Storage Temperature | 50 to 90 degrees F |
| and Humidity | [10 to 32 degrees C] |
|
| 20 to 70% RH, |
|
|
|
| Typical Ambient | 50 to 104 degrees F |
| Temperature | [10 to 40 degrees C] |
Electrical Requirements
The customer must provide an electrical receptacle within 10 feet [3m] of the Conversion Station. If the Conversion Station is to be used in the book stacks, it is the responsibility of the customer to provide an extension cord.
For operations outside of the U.S. (OUS), the customer must provide a power cord.
Voltage | 110/120 VAC |
| 220/240 VAC |
|
|
Amperes | 110/120 VAC – 5 Amps |
| 220/240 VAC – 2.5 Amps |
|
|
RFID Operating | 13.56 MHz |
Frequency |
|
|
|
Tag Types
Make sure that you use the correct type of tag:
The Conversion Station Model 711 uses 3M™ D1 RFID tags only.
The Conversion Station Model 811 (used with the 3M™
3M inspects all RFID tags during manufacturing and ensures that shipments contain the quantity of good tags ordered. When defective tags are discovered, the following occurs:
Tags are added to the shipment to make up for defective tags discovered during the inspection.
A hole is punched through defective tags if a customer has purchased this option. Do not use tags with holes in them.
CAUTION
To reduce the risk associated with environmental contamination related injury:
The Conversion Station contains a lithium battery, mercury in the monitor/display, and circuitry that contains lead in the solder. At the end of service life, dispose of the Conversion Station in accordance with federal, state and local requirements.
5