Toshiba SL-9000-FFH-CA Operating Procedures, How to access REG., M.DOWN, or Rewrap menu, Power

Page 62
13- 1
SET NEXT

13. OPERATING PROCEDURES

■ NOTES BEFORE STARTING OPERATION

13. OPERATING PROCEDURES

WARNING!

Do not exceed the platter weight of maximum capacity. Or hang any item from the scale which exceed the platter weight.

■NOTES BEFORE STARTING OPERATION

(1)

Turn the power ON.

(2)

A sixteen-second scanning will be performed after pressing the

POWER

key.

(3)Should a power failure occur during operation, remove the commodity from the platter and insert the power plug into an AC outlet again when power is restored.

(4)If the scale is used with an unrated power source, inaccurate scaling or other errors may occur.

(5)If the zero point has shifted during scaling, and no tare is displayed, adjust the zero point by depressing the ZERO key.

(6)Check the date of the scale before operation every day.

(7)Make a test print before operation every day. Press the TEST key, and the test label is issued.

■How to access REG., M.DOWN, or REWRAP menu

The following display is the REG. menu display. When this display is shown after pressing the POWER key, you can start the REG. operation right away.

<REG.> MANU. WEIGH ENTER THE PLU #

 

lb

UNIT/$

TOTAL $

 

0.000

P

000000

To access a menu from other menus, press the ESC. key to show the Main menu and enter the menu No. When the M.DOWN and REWRAP menus are protected, enter the menu No. and then the password.

<Menu>

 

 

0.

PROG.

5.

REPORT

1.

REG.

6.

RESET

2.

MARK DOWN

7.

 

3.

REWRAP

8.

 

4.

SECURITY

9.

 

 

 

 

 

NOTE: If a label nothing is printed on is Section 10.11 and press the

issued after a printed label in batch mode, refer to key.

Page 61 Page 63
Image 62
Page 61 Page 63
Contents SL-9000/9000N-FFH-US/CA/QR Page Table of Contents 13.1 12.112.2 13.2Page Introduction 9 0 0 AccessoriesApplicable Model Specification ScaleOption Appearance Front Display Panel DisplayUS Type Rear Display PanelCA/QR Type Programming Keyboard Function KEY LayoutProgramming Keyboard Prog SpaceSend Operation Keyboard and Speed Keyboard Operation Keyboard FunctionLogo VoidESC FeedProcedure Before Operation Speed KEY SETPlatter Installation ProcedureScale installation on the wall or ceiling Removal and Replacement of RECEIPT/LABEL Removal and Replacement of RECEIPT/LABEL Outline of Operation Programming Procedures How to access to Programming MenuTitle and Contents of Programming Menu How to enter characters TEC StorePLU Data Edit MenuPLU Data Setting For the UPC#Key advances to the next menu. Pressing the ↑ Ingredient Message Nutrition Setting Pressing the ↓ key instead Returns to the preceding menu Daily Value Max digits Contents of Daily value Set the Daily Value TableMemory file sort Memory file is sorted when a memory full error occursDeleting Nutrition Data PLU Verifying Label Menu Item No Verifies PLU data stored in the scaleAddress and Commercial Message Setting Combination Message Message construction Message display timeThank YOU Call Scrolling Flashing Curtaining Scrolling up Scrolling downThank YOU Thank YOU ANK YOU Call AGASpecial Information ESC MenuDepartment Number Speed KEY SettingSetting Department/Vendor Number Vendor NumberPrint Format By pressing KeyLabel Format Number Table Format NoCMT Operations DATE/TIME SettingMenu Item No Error code during PL-3 PL-3 OperationCMT Transmission Item ListItem # Transmission Delay Time Table IN-LINE/LOCALLON System Price Address SL-9000N only Cancel Retry ContinueData Transmission Initial #0-19, SL-9000N only① Weigh or Fix Price Format Default Bar Code FormatBAR Code Format ② By Count FormatPLU # UPC # PC/D Flag PLU # UPC # PC/D Price WeightPLU # UPC # Additional 233 Title No Format Additional 221Additional 231 232 Additional 234 235 Additional 7,8 238 Additional 9,10 239Verify SL-9000=CMT Transferring Logo DataSL-9000N only Idiom Setting Error message during data transmissionVendor Setting Enter Free Format SettingKey functions SP-INFO/NET WT ① Logo Print coordinate How to access Report menu Programmed Data Verification ReportsSet the zone PLU #. Ex. PLU #100 to R S Password SecuritySetting Password and Protect Menu R S X Z× ー × Calling Menu by Entering Password Power Operating ProceduresHow to access REG., M.DOWN, or Rewrap menu Menu REG., M.DOWN, or Rewrap Mode Weigh Weighing OperationFIX Price Operation for US Type only By Count Operation For Print Count Operation Example B When operating in Fix or By Count mode Set the number of labels. Max labels Enter the PLU # Issuing Labels with NET Weight Statement for US Type only PLUSample label 13-10 TARE/SAVE Function Procedures Calling and Printing Grade Lines Calling and Printing Logos LogoMenu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Selecting Print ItemDate Change Batch Print Mode with 30 Items Run Assignment Unit Price Change and G.Line/LOGO Call Label Issue Stop or Cancel Visual Commodity Library Dpt #UNIT/$ Total $ Floating VendorApple Price deletion SubtotalHow to access Report or Reset menu Total OperationPLU Total Report Hourly Total ReportGrand Total Report Ex. Report MenuVendor Total Report Entire PLU TotalError Message Table Programming ModeLabel lssue Mode Report and Reset ModeLON System Mode Cleaning the Print Head Troubleshooting Before You Call for Service

SL-9000N-FFH-QR, SL-9000N-FFH-US, SL-9000-FFH-CA, EM1-31076, SL-9000-FFH-US specifications

The Toshiba SL-9000 series, including models SL-9000-FFH-QR, SL-9000-FFH-US, SL-9000N-FFH-CA, EM1-31076, and EM1-31076EE, represents a significant advancement in modern technology, particularly in the field of home appliances and electronics. These models are designed with an emphasis on efficiency, user convenience, and innovative features that enhance functionality.

A standout feature across the SL-9000 series is its energy efficiency, which is achieved through advanced engineering and cutting-edge materials. This makes these models environmentally friendly while also reducing operational costs for users. The integrated technologies ensure that the devices operate at optimal performance levels even under demanding conditions.

The SL-9000-FFH-QR and SL-9000-FFH-US offer state-of-the-art connectivity options, allowing seamless integration with smart home systems. Users can control these appliances remotely through mobile applications or voice commands, contributing to a more convenient and customizable experience. The intuitive user interface is designed for ease of use, making it accessible for all age groups.

Another noteworthy characteristic is the superior build quality of these models. Toshiba employs robust materials that ensure durability and longevity, promising reliability over years of use. This attention to material quality also aligns with the aesthetic appeal of the devices, making them a stylish addition to any home environment.

The SL-9000N-FFH-CA features enhanced smart technologies, including real-time monitoring systems that provide users with valuable data on energy consumption and performance metrics. This information allows for informed decision-making regarding usage patterns and energy-saving practices.

The EM1-31076 and EM1-31076EE models focus on user-centric design, featuring adjustable settings that cater to individual preferences. This customization capability enhances the overall user experience, ensuring that each appliance meets unique needs effectively.

Overall, the Toshiba SL-9000 series combines innovative technology, energy efficiency, and user-friendly design to create appliances that not only perform exceptionally well but also integrate seamlessly into modern lifestyles. With these features and characteristics, Toshiba continues to set a high standard in the competitive landscape of home technology.
Top Page Image Contents