Toshiba SL-9000N-FFH-US, SL-9000N-FFH-CA, SL-9000N-FFH-QR, SL-9000-FFH-US Cleaning the Print Head

Page 89
Screw (FL-3x6)

16. CLEANING THE PRIT HEAD

16. CLEANING THE PRINT HEAD

16. CLEANING THE PRINT HEAD

WARNING!

Care must be taken not to injure your fingers with the label cutter during installing, removing or cleaning it.

If the print head is dirty, printing will not be clear. The print head should be cleared with a print head cleaner everyday before use, according to the following procedure:

1.Open the printer cover and turn the head-up lever to the anticlock wise. (See page 8-1)

2.Clean the print head element with the print head cleaner.

NOTE: Be careful not to damage the print head when cleaning.

Print Head Element

Print Head Cleaner

3.If any label paste is found on the label cutter, wipe off the paste with alcohol.

■After removing the label cutter, reattach it using the following procedure.

1.Remove the receipt/label from the scale.

2.Install the label cutter, aligning the cutter notches with the screw holes.

3.Secure the cutter with the screws (FL-3×6) so the bottom of the cutter is 0.5～0.8 mm above

the peel-off plate.

Screw (FL-3x6)

 

Clearance

 

0.5～0.8 mm

Label Cutter

 

Strip Plate

Label Cutter

 

NOTES:

1.If the cutter is scratching labels during printing, increase the clearance between the cutter and the peel-off plate.

2.When the cutter is stained with glue or paper dust, clean it with a cotton swab moistened with alcohol.

16- 1

Page 88 Page 90
Image 89
Page 88 Page 90
Contents SL-9000/9000N-FFH-US/CA/QR Page Table of Contents 12.2 12.113.1 13.2Page Introduction 9 0 0 AccessoriesApplicable Model Scale SpecificationOption Appearance US Type DisplayFront Display Panel Rear Display PanelCA/QR Type Programming Keyboard Function KEY LayoutProgramming Keyboard Prog SpaceSend Operation Keyboard Function Operation Keyboard and Speed KeyboardESC VoidLogo FeedSpeed KEY SET Procedure Before OperationPlatter Installation ProcedureScale installation on the wall or ceiling Removal and Replacement of RECEIPT/LABEL Removal and Replacement of RECEIPT/LABEL Outline of Operation How to access to Programming Menu Programming ProceduresTitle and Contents of Programming Menu TEC Store How to enter charactersMenu PLU Data EditFor the UPC# PLU Data SettingKey advances to the next menu. Pressing the ↑ Ingredient Message Nutrition Setting Pressing the ↓ key instead Returns to the preceding menu Set the Daily Value Table Daily Value Max digits Contents of Daily valueMemory file sort Memory file is sorted when a memory full error occursDeleting Nutrition Data Menu Item No Verifies PLU data stored in the scale PLU Verifying LabelAddress and Commercial Message Setting Message construction Message display time Combination MessageThank YOU Scrolling Flashing Curtaining Scrolling up Scrolling downThank YOU Call Thank YOU ANK YOU Call AGAESC Menu Special InformationSetting Department/Vendor Number Speed KEY SettingDepartment Number Vendor NumberBy pressing Key Print FormatFormat No Label Format Number TableCMT Operations DATE/TIME SettingMenu Item No PL-3 Operation Error code during PL-3CMT Transmission Item ListItem # IN-LINE/LOCAL Transmission Delay Time TableLON System Data Transmission Cancel Retry ContinuePrice Address SL-9000N only Initial #0-19, SL-9000N onlyBAR Code Format Default Bar Code Format① Weigh or Fix Price Format ② By Count FormatPLU # UPC # PC/D Flag PLU # UPC # PC/D Price WeightPLU # UPC # Additional 231 232 Title No Format Additional 221Additional 233 Additional 234 235 Additional 7,8 238 Additional 9,10 239Verify SL-9000=CMT Transferring Logo DataSL-9000N only Error message during data transmission Idiom SettingVendor Setting Enter Free Format SettingKey functions SP-INFO/NET WT ① Logo Print coordinate Programmed Data Verification Reports How to access Report menuSet the zone PLU #. Ex. PLU #100 to Setting Password and Protect Menu Password SecurityR S R S X Z× ー × Calling Menu by Entering Password Power Operating ProceduresHow to access REG., M.DOWN, or Rewrap menu Weighing Operation Menu REG., M.DOWN, or Rewrap Mode WeighFIX Price Operation for US Type only By Count Operation For Print Count Operation Example B When operating in Fix or By Count mode Set the number of labels. Max labels Enter the PLU # PLU Issuing Labels with NET Weight Statement for US Type onlySample label 13-10 TARE/SAVE Function Procedures Calling and Printing Grade Lines Logo Calling and Printing LogosSelecting Print Item Menu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by CountDate Change Batch Print Mode with 30 Items Run Assignment Unit Price Change and G.Line/LOGO Call Label Issue Stop or Cancel Dpt # Visual Commodity LibraryUNIT/$ Total $ Floating VendorApple Subtotal Price deletionTotal Operation How to access Report or Reset menuGrand Total Report Hourly Total ReportPLU Total Report Ex. Report MenuEntire PLU Total Vendor Total ReportProgramming Mode Error Message TableReport and Reset Mode Label lssue ModeLON System Mode Cleaning the Print Head Before You Call for Service Troubleshooting

SL-9000N-FFH-QR, SL-9000N-FFH-US, SL-9000-FFH-CA, EM1-31076, SL-9000-FFH-US specifications

The Toshiba SL-9000 series, including models SL-9000-FFH-QR, SL-9000-FFH-US, SL-9000N-FFH-CA, EM1-31076, and EM1-31076EE, represents a significant advancement in modern technology, particularly in the field of home appliances and electronics. These models are designed with an emphasis on efficiency, user convenience, and innovative features that enhance functionality.

A standout feature across the SL-9000 series is its energy efficiency, which is achieved through advanced engineering and cutting-edge materials. This makes these models environmentally friendly while also reducing operational costs for users. The integrated technologies ensure that the devices operate at optimal performance levels even under demanding conditions.

The SL-9000-FFH-QR and SL-9000-FFH-US offer state-of-the-art connectivity options, allowing seamless integration with smart home systems. Users can control these appliances remotely through mobile applications or voice commands, contributing to a more convenient and customizable experience. The intuitive user interface is designed for ease of use, making it accessible for all age groups.

Another noteworthy characteristic is the superior build quality of these models. Toshiba employs robust materials that ensure durability and longevity, promising reliability over years of use. This attention to material quality also aligns with the aesthetic appeal of the devices, making them a stylish addition to any home environment.

The SL-9000N-FFH-CA features enhanced smart technologies, including real-time monitoring systems that provide users with valuable data on energy consumption and performance metrics. This information allows for informed decision-making regarding usage patterns and energy-saving practices.

The EM1-31076 and EM1-31076EE models focus on user-centric design, featuring adjustable settings that cater to individual preferences. This customization capability enhances the overall user experience, ensuring that each appliance meets unique needs effectively.

Overall, the Toshiba SL-9000 series combines innovative technology, energy efficiency, and user-friendly design to create appliances that not only perform exceptionally well but also integrate seamlessly into modern lifestyles. With these features and characteristics, Toshiba continues to set a high standard in the competitive landscape of home technology.
Top Page Image Contents