Toshiba SL-9000N-FFH-CA, SL-9000N-FFH-US, SL-9000N-FFH-QR, SL-9000-FFH-US, EM1-31076 LON System Mode

Page 88

15. ERROR MESSAGE TABLE

15. ERROR MESSAGE TABLE

●

CMT Operation Mode

Message

Cause

Solution

Mismatch of the model type.

Mismatch of the base unit.

MISMATCH SCALE SPEC

Press the

key

Mismatch of the VERSION.

CLEAR

Mismatch of the

TRANSMITTING DATA.

Mismatch of the scale capacity.

Parity error

Framing error

BAD TAPE OR CMT

Press the

key

Overrun error

CLEAR

Data error

Two or More Hardware error

TIME OUT ERROR

Time out error

Press the

CLEAR

key.

●

LON System Mode

Message

Cause

Solution

M

BM/S

COMMUNICATION

1. The power of the master or

1. Turn the power of the master

ERROR

backup master scale is not turned

or backup master scale ON.

ON.

Connect them with each other

They are not connected with each

or turn the scale in-line.

○

○

other or in off-line state.

2. Call your authorized service

2. LON cable is broken.

representative.

SEQUENCE ERROR

The power was not turned OFF and

Turn the power switch OFF and

○

○

ON again after setting ID #.

ON again.

SEQUENCE NO.

Text data number is incorrect.

Call your authorized service

―

○

ERROR

representative.

MASTER BUSY

Registration job is performed on a

1. Quit reset job on the master

satellite scale while reset job is

scale.

―

○

performed on the master scale.

2. Quit registration job on the

satellite scale.

BACKUP MASTER

The backup master does not have

Down load PLU from the master

NOT RESET

same PLU with the master scale.

to the backup master scale.

○

―

Then run the reset operation

again.

TEXT ERROR ##

1. Error text is found.

Call your authorized service

02:

Sequence No. error

representative.

05:

LRC error

08:

Text error

○

○

09:

Command error

2. The

master scale differs from

other scale in ROM version.

M: Master scale BM: Backup master scale S:

Satellite scale

15- 3

Image 88

Contents SL-9000/9000N-FFH-US/CA/QR Page Table of Contents 12.1 12.213.1 13.2Page Introduction Applicable Model Accessories9 0 0 Specification ScaleOption Appearance Display US TypeFront Display Panel Rear Display PanelCA/QR Type Programming Keyboard KEY LayoutProgramming Keyboard Function Send SpaceProg Operation Keyboard and Speed Keyboard Operation Keyboard FunctionVoid ESCLogo FeedProcedure Before Operation Speed KEY SETScale installation on the wall or ceiling Installation ProcedurePlatter Removal and Replacement of RECEIPT/LABEL Removal and Replacement of RECEIPT/LABEL Outline of Operation Programming Procedures How to access to Programming MenuTitle and Contents of Programming Menu How to enter characters TEC StorePLU Data Edit MenuPLU Data Setting For the UPC#Key advances to the next menu. Pressing the ↑ Ingredient Message Nutrition Setting Pressing the ↓ key instead Returns to the preceding menu Daily Value Max digits Contents of Daily value Set the Daily Value TableDeleting Nutrition Data Memory file is sorted when a memory full error occursMemory file sort PLU Verifying Label Menu Item No Verifies PLU data stored in the scaleAddress and Commercial Message Setting Combination Message Message construction Message display timeScrolling Flashing Curtaining Scrolling up Scrolling down Thank YOUThank YOU Call Thank YOU ANK YOU Call AGASpecial Information ESC MenuSpeed KEY Setting Setting Department/Vendor NumberDepartment Number Vendor NumberPrint Format By pressing KeyLabel Format Number Table Format NoMenu Item No DATE/TIME SettingCMT Operations Error code during PL-3 PL-3 OperationItem # Transmission Item ListCMT Transmission Delay Time Table IN-LINE/LOCALLON System Cancel Retry Continue Data TransmissionPrice Address SL-9000N only Initial #0-19, SL-9000N onlyDefault Bar Code Format BAR Code Format① Weigh or Fix Price Format ② By Count FormatPLU # UPC # Flag PLU # UPC # PC/D Price WeightPLU # UPC # PC/D Title No Format Additional 221 Additional 231 232Additional 233 Additional 234 235 Additional 7,8 238 Additional 9,10 239SL-9000N only Transferring Logo DataVerify SL-9000=CMT Idiom Setting Error message during data transmissionVendor Setting Key functions Free Format SettingEnter SP-INFO/NET WT ① Logo Print coordinate How to access Report menu Programmed Data Verification ReportsSet the zone PLU #. Ex. PLU #100 to Password Security Setting Password and Protect MenuR S R S X Z× ー × Calling Menu by Entering Password How to access REG., M.DOWN, or Rewrap menu Operating ProceduresPower Menu REG., M.DOWN, or Rewrap Mode Weigh Weighing OperationFIX Price Operation for US Type only By Count Operation For Print Count Operation Example B When operating in Fix or By Count mode Set the number of labels. Max labels Enter the PLU # Issuing Labels with NET Weight Statement for US Type only PLUSample label 13-10 TARE/SAVE Function Procedures Calling and Printing Grade Lines Calling and Printing Logos LogoMenu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Selecting Print ItemDate Change Batch Print Mode with 30 Items Run Assignment Unit Price Change and G.Line/LOGO Call Label Issue Stop or Cancel Visual Commodity Library Dpt #Apple Floating VendorUNIT/$ Total $ Price deletion SubtotalHow to access Report or Reset menu Total OperationHourly Total Report Grand Total ReportPLU Total Report Ex. Report MenuVendor Total Report Entire PLU TotalError Message Table Programming ModeLabel lssue Mode Report and Reset ModeLON System Mode Cleaning the Print Head Troubleshooting Before You Call for Service

SL-9000N-FFH-QR, SL-9000N-FFH-US, SL-9000-FFH-CA, EM1-31076, SL-9000-FFH-US specifications

The Toshiba SL-9000 series, including models SL-9000-FFH-QR, SL-9000-FFH-US, SL-9000N-FFH-CA, EM1-31076, and EM1-31076EE, represents a significant advancement in modern technology, particularly in the field of home appliances and electronics. These models are designed with an emphasis on efficiency, user convenience, and innovative features that enhance functionality.

A standout feature across the SL-9000 series is its energy efficiency, which is achieved through advanced engineering and cutting-edge materials. This makes these models environmentally friendly while also reducing operational costs for users. The integrated technologies ensure that the devices operate at optimal performance levels even under demanding conditions.

The SL-9000-FFH-QR and SL-9000-FFH-US offer state-of-the-art connectivity options, allowing seamless integration with smart home systems. Users can control these appliances remotely through mobile applications or voice commands, contributing to a more convenient and customizable experience. The intuitive user interface is designed for ease of use, making it accessible for all age groups.

Another noteworthy characteristic is the superior build quality of these models. Toshiba employs robust materials that ensure durability and longevity, promising reliability over years of use. This attention to material quality also aligns with the aesthetic appeal of the devices, making them a stylish addition to any home environment.

The SL-9000N-FFH-CA features enhanced smart technologies, including real-time monitoring systems that provide users with valuable data on energy consumption and performance metrics. This information allows for informed decision-making regarding usage patterns and energy-saving practices.

The EM1-31076 and EM1-31076EE models focus on user-centric design, featuring adjustable settings that cater to individual preferences. This customization capability enhances the overall user experience, ensuring that each appliance meets unique needs effectively.

Overall, the Toshiba SL-9000 series combines innovative technology, energy efficiency, and user-friendly design to create appliances that not only perform exceptionally well but also integrate seamlessly into modern lifestyles. With these features and characteristics, Toshiba continues to set a high standard in the competitive landscape of home technology.