Siemens CIELO manual Attaching the audio shoe, Removing the audio shoe

Page 17

Before the audio shoe can be connected to the hearing system the following steps have to be fullfilled:

1.Open the battery compartment

2.Open the audioshoe cover

3.Close the battery compartment

Attaching the audio shoe

Take the audio shoe and hook the two nibs into the two small recesses of the hearing system housing. Slide the audio shoe to the inner side of the hearing system housing until it snaps into the end position.

Removing the audio shoe

To remove the audio shoe, slide the audio shoe in the opposite direction.

With the connected audio shoe the battery compartment switch is disable and the hearing system only can be switched off with the push button.

Safety Instructions for hearing systems with audio input The audio input may be connected to line-operated equipment only if the equipment fulfils the safety requirement IEC 65 / DIN VDE 0860.

17

Image 17
Contents Cielotm Congratulations Contents Your Cielo BTE behind-the- ear hearing system FeaturesCielo SP Inserting the battery Battery insertion and removalLow battery indicator Removing the batteryPage Battery compartment door lock Tip Inserting and removing your Cielo BTETo turn on Via the battery compartmentTo turn off Via the push button Power-on delayHow to select the programs Using the program buttonFor Cielo DIR Using the directional microphone systemFor Cielo DIR, Cielo P and Cielo SP Using the volume controlSmall recess Hearing system housingAudio input Removing the audio shoe Attaching the audio shoeAutomatic telephone program Using the telephoneAutoPhone magnet accessory Page Care tips Maintenance and careImportant notes System clogged Troubleshooting tipsSound is Subject to change without prior notice