6.Measuring Weight Only
6. Measuring Weight Only
1. Turn on the power, by pressing the power switch.
“CAL” blinks on the display, then the display changes to 0.0 kg.
Notes:
• If you step onto the unit before 0.0 kg appears on the display, an error message “Err” will appear.
• You can change the measurement units used for the height and weight settings. To change the measurement unit:
1) Keep the | button pressed until “lb” and “kg” blink on |
the display. |
|
2) Press the or button to select the desired measurement unit, “lb” or “kg”. This will automatically change “cm” and “in”.
3)Press the SET button to confirm the change.
2.When the 0.0 kg appears on the display, step onto
the unit.
EN
3. Check the measurement results.
Your weight is displayed on the display and blinks twice to indicate that measurement is complete.
Note: You can also check the measurement result by taking out the display unit.
Example: Weight 73.8 kg
4.When the measurement is completed, step down from the unit and turn off the power.
27