4.Setting and Storing Personal Data
6.[TO SET HEIGHT]
Setting range: 100.0 to 199.5 cm (Display range in inch display mode: 3' 4" to 6' 6 3/4")
1)Press the or button to adjust the height setting
to the desired height.
2) Press the SET button to confirm the settings.
After the settings for age, gender, and height are displayed in that sequence, then 0.0 kg appears on the display. You can now start taking measurements. (Proceed to Step 3 in Section 5 “Taking a Measurement”.)
When using GUEST mode, the unit starts measurement after
the height setting has been confirmed. Refer to Section 5. The personal data has been stored in selected personal profile number.
Changing the Information for a Personal Profile Number
If the personal data stored for any of the personal profile numbers
1.Push the power switch to turn on the unit.
“CAL” blinks on the display, then the display changes to 0.0 kg. Wait until 0.0 kg appears on the display.
2.Take out the display unit.
3.Select the personal profile number for which you want to modify the personal data.
1)Press the personal profile number button to select a personal profile number.
The display of the selected personal profile number flashes once.
2) Press the SET button.
The personal profile number is confirmed and the selected age setting blinks on the display.
4.Change the stored data.
1)Modify the age setting.
a)Press the or button to adjust the age setting to the desired age.
b)Press the SET button.
The age setting is confirmed, and the gender icon blinks on the display.
18