Dolby PRO Logic, Dolby Pro Logic, Test Tone

English

SETTING UP FB219W

Switching On.Standby.Off

The transmitter is equipped with a sensitive input. If there is no signal on the SUB and SURR input the transmitter and the surround speakers will switch to standby after approximately 100 seconds.

The green light on the front of the active surround speakers shows that the speakers are on. If the red light is on, the speakers has switched to standby. To switch the active speakers off, use the POWER switch.

If the red light on the front of the transmitter is off, it has switched to standby. To switch the transmitter off, unplug the AC/DC adapter from the power source.

General Information

Any amplifier or receiver used at high power can produce distortions which may seriously damage your speakers. If distortion occurs, reduce the volume and the tone control to a level where the sound is acceptable again.

When using microphones, avoid feedback which occurs when a microphone picks up sound from the speakers, resulting in a howling noise. Keep the microphone away from the speakers or reduce the volume.

More wireless products …

The transmitter is also equipped to drive an optional wireless subwoofer, wireless stereo speakers or wireless headphones.

Please ask your dealer about these products. Refer to the instructions provided with these products before using them with your transmitter.

DOLBY PRO LOGIC

Dolby Pro Logic

This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambience. The Pro Logic system allows more accurate definition of the individual sound sources. It produces greater sound separation between channels and provides pinpoint sound localization. Pro Logic provides four sound outputs: Left, Center, Right and Surround (Rear). Front sounds are produced from the pair of Left and Right speakers and a Center speaker. The surround sound is reproduced by two speakers placed at the rear of the listening area. Although the surround sound is monaural (single-source), a pair of speakers is necessary to produce the correct diffused sound.

This Pro Logic decoder enables you to decode the following modes: Dolby

Surround, Center Phantom, Dolby 3 Stereo or normal Stereo.

Test Tone

This feature enables you to adjust the Front Left, Front Right, Center and Surround Sound levels of the respective speakers in Dolby Pro Logic mode.

You must sit at the ideal sitting position and use the remote control to perform this operation.

1Press CD, TUNER, TAPE or AUX to switch on the system.

2Press TEST TONE.

ª A test signal is

generated; it will	UTE	TEST
move through the		TONE
move through the		CENTER
Left, Center, Right,		CENTER
Left, Center, Right,
and Surround
speakers, in that order.

ª"TEST TONE" followed by

"ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed.

ªThe test signal will last for about 90

seconds.

3Press

BALANCE		BALANCE	CENTER
BALANCE	L	R	- +
L to adjust	L	R	- +
L to adjust			REAR
the sound		-	+
of the front
left speaker.

ªThe display will show BAL L+XX.

4Press BALANCE R to adjust the sound of the front right speaker.

ªThe display will show BAL R +XX.

5Press CENTER +or -to adjust the sound of the center speaker.

ªThe display will show either CENT +XX or -XX.

6Press REAR +or -to adjust the sound of the surround speakers.

ªThe display will show either REAR +XX or -XX.

FW798W specifications

The Philips FW798W is a notable entry in the world of compact audio systems, delivering a potent combination of robust performance, modern design, and versatile features. Designed with the audiophile in mind, this mini Hi-Fi stereo system is packed with advanced technologies that ensure superior sound quality and an enriching listening experience.

One of the standout features of the FW798W is its powerful output, capable of delivering dynamic sound that fills any room. The system often incorporates high-quality speakers that are engineered to produce clear highs, rich mids, and deep bass, creating an immersive audio environment for music, movies, and games alike. The overall design is compact yet sleek, allowing it to blend seamlessly into various home aesthetics while saving space.

The Philips FW798W is equipped with multiple sources for audio playback, including CD, FM/AM radio, and USB input, broadening its versatility. Users can enjoy their favorite CDs, listen to live radio broadcasts, or play music directly from their digital devices via USB, ensuring that one’s music library is always accessible. The system also features Bluetooth connectivity, allowing users to effortlessly stream music from smartphones, tablets, or other Bluetooth-enabled devices, making it even more user-friendly.

Moreover, the FW798W employs advanced audio technologies such as Digital Sound Control and Dynamic Bass Boost, which allow users to tailor their listening experience according to their preferences. Whether you prefer a more subdued sound profile or something with a punchier bass, these features ensure that you can manipulate the settings for optimal enjoyment.

The unit's user interface is designed with convenience in mind, often accompanied by a remote control that simplifies navigation through tracks and settings. A clear LED display provides essential information on tracks and radio stations, contributing to a more intuitive user experience.

In summary, the Philips FW798W stands out in the compact audio system market due to its impressive sound quality, extensive playback options, and user-friendly operation. Whether for casual listening or immersive experiences, this system caters to a variety of audiophile needs, making it a worthy addition to any home audio setup.