Panasonic ES-WD51 operating instructions Cleaning, Wet/foam shaving, Dry cleaning, Wet cleaning

Attach the shaver head [F].

•Press gently so that the whole blade is in close contact with the skin and the surface of the blade does not move up and down.

Wet/foam shaving

Shaving with soap/lather makes the skin slippery for a closer shave.

1

2 Remove the bikini comb [E].

3 Check that the outer foil is not deformed or damaged.

4 Wet your skin and put soap/lather on your skin.

•Do not use shaving cream, skin cream or skin lotion as it will clog the blades.

5 Press the OFF/ON switch [G] to turn on the power.

Cleaning

Always clean the frame, gentle/beginner caps and discs after
use to keep them in a hygienic state.	English
Switch off and unplug the appliance before cleaning.
Dry cleaning

1. Lift the frame, gentle/	1
beginner caps upward
while holding the cap
release rib [B] or
remove the frame by
pushing the frame release
button [F8].
	2
2. Clean the epilation head [D]
and the shaver head [F] with
the cleaning brush [I].

Wet cleaning

1.Lift the frame, gentle/beginner caps upward while holding the cap release rib [B] or remove the frame by pushing the frame release button [F8].

2. Apply liquid hand soap	2-4
to the discs and the

blades.

3. Turn the switch on and then wet the discs and the blades to create foam.