SWITCH COVER AREA WIRING MANAGEMENT
PARTS LIST (MOTOR HOUSING, MOTOR, HANDLE, AND BODY)... C BLOCK
To Plug End
Cord
Retainer
Wire
Connectors
Power Cord
(With Yellow
Outer Jacket)
Wire
TieOn/Off
Switch
Wire
1 2 3 Cord
(3 Wire)
Insulator
Packing
Ref. No. | Part Name & Description | Part No. | Quantity | Remarks |
Dust Container, Machined | AC88KAPNZV17 | 1 | (Includes | |
Switch, ON/OFF | 1 | (Includes | ||
Power Cord | AC94EAPNZYØ2 | 1 | (Includes | |
Wire Nut | 4 |
| ||
Packing Dust Container | AC66KVØ1VØ6 | 2 |
| |
Switch, Cover | ACØ3EVØ7VØ6 | 1 | (Includes | |
Packing Switch Cover | AC73KVØZVØ6 | 1 |
| |
Switch Cover Screw | AXTN+16BFY | 2 |
| |
Screw, Handle | 1 |
| ||
Nut, Handle Screw | 1 |
| ||
Supporter, Filter | 1 |
| ||
HEPA Filter, Secondary | AC37KAAEZØØ | 1 |
| |
Wheel | 2 |
| ||
Roller Shaft | AC16CUSZØØ | 1 |
| |
Wheel Stopper | AC74SUSZØØ | 2 |
| |
Washer | AXWG6E115FY | 2 |
| |
Dust Bag | AC16KBYTZØØØ | 1 |
|
(Approx. 1 1/8 in./30 mm Beyond the Strain Relief)
(Fig. 15)
POWER CORD/ON-OFF SWITCH REPLACEMENT
DUST COMPARTMENT COMPONENT LOCATIONS |
(Fig. 16) |
Removal
1.Remove the dust cover and switch cover to expose the electrical connections of the power cord, ON/OFF switch, and wire cord.
2.Pull the power cord into the dust compartment in order to remove the strain relief (for power cord replacement) by prying or cutting, remove the wire connectors, and wire tie, if present.
3.Remove the ON/OFF switch (for ON/OFF switch replacement) by depressing the switch retaining tabs while pushing up out of the dust compartment at the same time.
4.Pull the power cord out of the dust compartment (for power cord replacement).
(Continued on p. 14)
Screw, Hose Holder | AXTN4+45BFY | 1 |
| |
Cover, Inlet | ACØ2HYUZVØ6 | 1 |
| |
Screw, Inlet | AXTN4+16BFY | 2 |
| |
Motor Case | AC99FAAEZVØ7 | 1 |
| |
Packing, Rear Cover | 1 |
| ||
Packing, Motor Case | AC19FJPZVØ6 | 1 |
| |
Screw, Motor Case | AXTN4+2ØBFY | 4 |
| |
Fan Motor | AC92FAPNZØØ | 1 |
| |
Cover Cap | AC38HAPNZØU | 1 |
| |
Screw, Ground | AXYN4+E1ØFFY | 1 |
| |
Noise Suppressor | AC99GAMMZØØ | 1 |
| |
Motor Support, Rear | 1 |
| ||
Motor Support, Front | 1 |
| ||
Wirecord | AC37GTEZØU | 1 |
| |
Wire Nut | 3 |
| ||
Handle | AC64BATNZØØ | 1 |
| |
Motor Lead Assembly | AC99WARGZØØ | 1 |
| |
Dust Cover | AC6ØKCCAZUU3 | 1 |
| |
Stretch Hose | AC84PJPZVØ6 | 1 |
| |
Hose Holder | AC23PJPZVØ7 | 1 |
| |
Tie Cable | 1 |
| ||
Motor Protector | AC69KJMZVØ6 | 1 |
| |
Protector Spring, Silver | AC7ØKJMZØØ | 1 |
| |
Protector Support | AC18MJMZVØ6 | 1 |
| |
Protector Case | AC68KJMZVØ6 | 1 |
| |
Rubber Protector | AC51E4GZUØ1 | 1 |
| |
Flat Washer | AXWE1ØJ223FE | 1 |
| |
Cord Retainer | ACØ6WAPNZØØ | 1 |
| |
Packing | AC61LAGMZØØ | 1 |
| |
Hose Hook | AC53RJPZVØ7 | 1 |
| |
Crevice Tool | AC6ØRZFZVU6 | 1 |
| |
Dusting Brush | AC88RYUZVØ6 | 1 |
| |
Wand, Extension | AC4ØPJP1VØ6 | 1 |
| |
Wand Holder | AC7ØPJPZVØ7 | 1 |
| |
Screw, Tool Holder | AXTN4+16BFY | 3 |
| |
Cap, Motor | AC93FTEZØU | 1 |
| |
Handle Assembly | AC95BATNZVØ7 | 1 | (Includes |
- 14 - | - 7 - |