Micro Technic 81781, 81791 user manual Alarm Mode Switch Settings, Battery Installation

2-Button Reset

Figure 1

Battery Compartment

Alarm tone selector (81791 only)

DC Adapter (81791 only)

Nurse call receptacle (81791 only)

Figure 2

Hi / Lo/ NC

Switch

0 or 2- second delay switch

Figure 3

Pad Jack

Strain

Relief

Alarm Mode Switch Settings

Volume Setting		81781	81791
		Local alarm only	Local alarm only
	High
	Low	Local alarm only	Local alarm only
	Nurse Call	Local alarm only *	Alert at nurse station**

*If the Informer-Mate™Model 81781 is set to Nurse call the monitor defaults to Low setting. **If the Informer-Mate™Deluxe Model 81791monitor is set to Nurse Call and the nurse station is not connected the monitor defaults to local alarm.

Battery Installation

Slide open the battery cover on the back of the monitor. The cover will remain attached to the monitor. Insert a new 9V alkaline battery, making sure to observe proper battery polarity (positive to positive, negative to negative).

2