Lumex Syatems LF1050 owner manual Assembly Instructions

Page 8

ASSEMBLY INSTRUCTIONS

Warning: The lift is heavy. Therefore, avoid injury and DO NOT attempt to remove the lift from the box without assistance.

1. Raise Mast from base

2.Engage the brakes. Remove the bolts from the bottom of the mast and base. Pull the Mast, Boom and Spreader Bar to an upright position. Re-insert the bolts into the holes at bottom of the mast and tighten the nuts.

3.Attach the Control Box Hanging Bracket to the Mast and tighten the nuts.

4. Place the control box inside the bracket.

8	LF1050 Patient Lift Owner’s Manual

Image 8

Contents Patient Lift Page Contents Introduction Special NotesMaintenance Safety PrecautionsPage Features Handling ProceduresUnpacking InspectionAssembly Instructions Page Lift and Transfer From Bed Operating InstructionsPreparation Before Lifting Transfer From Wheelchair Checking the Battery Know What The Battery Indicator Lights Are Telling YouCharging the Batteries Important Notes on ChargingCare and Maintenance CleaningLubrication Checking for damage and wearMaintenance Schedule Troubleshooting Symptom Possible Cause ActionSpecifications Limited Warranty Warranty Shall be Limited to SuchForegoing Warranty is Exclusive Page A., Corporate Headquarters