Braun Toothbrush manual SmartGuide display unit, Brushheads, Wall mount

In the first few days of using any electric toothbrush, your gums may bleed slightly. This is usually a sign of pre-existing gum inflammation. Using your Oral-B Triumph toothbrush properly should reduce inflammation and as a result bleeding should stop after a few days. Should it persist after 2 weeks, please consult your dentist or hygienist. If you have sensitive teeth and gums, Oral-B recommends using the «sensitive» mode.

Brushheads

The Oral-B FlossAction brushhead (a) is recommended for everyday deep cleaning. For occasional or everyday polishing, use the Oral-B Pro White (j) brushhead (not with all models). Please note: children under 12 should not use the Oral-B Pro White brushhead.

aj

Both brushheads contain a «smart chip» to communicate with the electronics inside the toothbrush handle. Therefore, your toothbrush automatically switches to the appropriate brushing mode for the attached brushhead. Nevertheless, you can select other brushing modes to customize your routine.

Do not use these brushheads with braces. We recommend using the Oral-B Ortho brushhead, which is specifically designed to clean around braces and wires.

SmartGuide display unit

Icons

«Clean» mode

«Sensitive» mode

«Massage» mode

«Polish» mode (not with all models)

Too much pressure is applied.

Reduce the brushing force.

«Quadrant circle» – currently you are brushing in the first 30-second interval. Move to the next quadrant of your mouth, when the second segment starts flashing.

Dentist recommended 2-minute brushing time has been reached.

* «Pre-notice» – that your brushhead needs to be replaced soon. You can use it for another 10 days (twice a day, 2 minutes) before the recommended replacement time has been reached.

* Your brushhead has surpassed

the dentist recommended usage time of 3 months (twice a day,

2 minutes). Replace it with a new one.

The rechargeable battery of the handle is low. Charge the tooth- brush handle.

Batteries of the SmartGuide display unit are low. Change batteries of the display unit.

*the «brushhead replacement» and «pre-notice brushhead replacement» features only work when using brushheads enabled with Smart Technology (Oral-B FlossAction and

Oral-B Pro White)

Wall mount

If you prefer to mount the SmartGuide display unit on a wall, mirror or other surface, use the adhesive tape (m) to fix the wall mount. Before doing so, make sure the chosen surface is clean and dry (remove grease and dust first). Position the wall mount so that the Oral-B logo is readable. Then press the wall mount evenly and firmly to the wall. Wait 24h before sliding the SmartGuide display unit into the fixed wall mount.

8