Maintenance, Lubrication & Adjustments, Photo a

Maintenance, Lubrication & Adjustments

Exterior Maintenance and Lubrication

Note: In order to ensure proper and consis- tent performance of the Braun RA200, routine maintenance in the form of cleaning, lubricating, inspecting, and adjusting is essential.

The following items can be accessed after de- ploying the platform, and without the removal of either the top or bottom cover.

Cleaning/Lubrication: All exterior parts of the ramp, accessible during stow or deploy, may be cleaned with high pressure water, with excep- tion of being pointed directly into the cassette or at the electrical connectors along the exterior

frame. A de-greasing agent and brush may be used if necessary to remove large buildups. Do not spray water directly into cassette or at the electrical connectors . Clean away debris that may be built up in beeper that may reduce or prohibit audibility.

Ramp Platform Hinge: Clean and lubricate the ramp platform hinge. A light oil may be used on the hinge, but should be limited to reduce the possible buildup of debris. See Photos C and

D.Allow hinge to dry before applying lubricant (light oil).

Photo A

Overall View of Deployed RA200

Photo C

Do not

spray water in this area!

Ramp

Platform

Hinge

Clean

and

Apply

Light Oil

Photo B

Electrical Connector

Photo D

Do not spray water directly into cassette!

Page 12