Braun RA200 service manual Sensor Bottom, Bottom Cover, Latches

Inspection List

Exterior Inspection

			See Manual
Inspect	For What	Action/Adjustment	Page No.
Beeper	Debris buildup	Clean	12
	Proper audible level	Replace beeper
Manual	Smooth, easy operation	Clean, lubricate cable	13
Release		See Troubleshooting Guide	24, 25
Cable
Manual	Debris buildup	Clean	18
Release	Cut or damaged lead wire	Repair or replace sensor
Sensor
Bottom	Damage resulting in ramp	Replace bottom cover	16
Cover	interference
Bottom Cover	Secured with tie-wrap	Add tie-wrap if missing	16
Latches	Proper compression of bottom	Adjust latch “draw” hook
	cover seal
Top Cover	Debris buildup	Clean	16
	Damage resulting in ramp inter-	Replace top cover
	ference
Top Cover	Proper adhesion/seal	Replace double-faced adhesive	14, 16
Seal		tape
RA200	Damage or lack of adhesion	Replace label
Label

Page 22