Philips RQ1060, RQ1052, RQ1050 Blocked shaving heads, Quick charge, Charging in the Power Pod

English 13

Blocked shaving heads

-- If the shaving heads are blocked, the shaving unit symbol and the tap symbol with exclamation mark flash. In this case, the motor cannot run because the shaving heads are soiled or damaged. 

Note:The displays of types RQ1062, RQ1060, RQ1052 and RQ1050 look different but show the same indication.

-- When this happens, you have to clean the shaving unit or replace it.

-- The shaving unit symbol and the tap symbol with exclamation mark continue to flash until you unblock the shaving heads.

Charging

Charging takes approx. 1 hour.

A fully charged shaver has a shaving time of up to

65 minutes, which is enough for approx. 21 shaves. The actual shaving time is calculated by the shaver. If you have a heavy beard, the shaving time may be less than 65 minutes.The shaving time may also vary over time, depending on your shaving behaviour and beard type.

Quick charge

After the shaver has charged for 5 minutes, it contains enough energy for one shave.

Charging in the Power Pod

1Put the small plug in the Power Pod.

2Put the adapter in the wall socket.