8ENGLISH
Battery fully charged
When the battery is fully charged, the bottom three green lights burn continuously and the top green light blinks at a very high frequency.
Battery capacity indication
Your Philips beard trimmer is equipped with a battery capacity indication.This indication becomes visible for 5 seconds every time the appliance is switched on or off.The number of burning green lights indicates the amount of battery capacity that is available.
Charging the appliance
BQT4080/QT4060 only:The appliance can also be run directly from the mains (see chapter 'Using the appliance', section 'Corded trimming').
Charge the appliance fully before you start using it for the first time or after a long period of disuse.
1Make sure the appliance is switched off before you start charging it.
2Insert the appliance plug into the appliance and put the powerplug in the wall socket.
QT4080 only:
◗It will take approx. 1 hour to fully charge the battery if it is completely empty. If there is still battery capacity available, fully charging the battery will take less time.
◗A fully charged appliance has a cordless trimming time of up to 50 minutes.
QT4060/QT4040 only:
◗The charging light goes on to indicate that the appliance is charging (fig. 5).
The charging light will not go out when the battery is fully charged.
◗It will take approx. 10 hours to fully charge the battery if it is completely empty. If there is still battery capacity available, fully charging the battery will take less time.