Philips HQ914, HQ912 manual Cleaning, After every use shaving unit and hair chamber

English

5Clean the shaver after every use (see chapter ‘Cleaning’).

6Put the protection cap on the shaver to prevent damage to the shaving heads (Fig. 8).

Note: Make sure that the lug of the protection cap covers the release button.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance.

Be careful with hot water.Always check if the water is not too hot, to avoid burning your hands.

Regular cleaning guarantees better shaving performance. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the appliance.

English

After every use: shaving unit and hair chamber

1Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver.

2Rinse the outside of the shaving unit under a hot tap for some time (Fig. 9).

3Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver

(2).  (Fig. 10)

4Rinse the inside of the shaving unit under a hot tap for some time (Fig. 11).

5Rinse the hair chamber under a hot tap for some time (Fig. 12).

6Put the shaving unit back onto the shaver (Fig. 13).

Every two months: shaving heads

Note: Do not use cleaning agents or alcohol to clean the shaving heads. Only use HQ110 Shaving Head Cleaning

Spray.

19 20