EN

5

MasterPage: Start_Right

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified
by the manufacturer.
10.Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or
sold with the
apparatus. When a
cart is used, use
caution when
moving the cart/
apparatus combination to avoid injury from tip-
over.
11.Unplug this apparatus during lightning storms
or when unused for long periods of time.
12.Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

Before cleaning, turn off the camcorder and
remove the battery pack and AC Adapter.

To clean the exterior

Wipe gently with a soft cloth. Put the cloth in
diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.

To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to
damage the monitor. Close the LCD monitor.

To clean the lens

Blow it with a blower brush, then wipe gently
with lens cleaning paper.

To clean the viewfinder lens

Remove dust from the viewfinder using a
blower brush.
NOTES:
Avoid using strong cleaning agents such as
benzine or alcohol.
Cleaning should be done only after the battery
pack has been removed or other power units
have been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated
cloth refer to the cautions of each product.
To clean the viewfinder, please consult your
nearest JVC dealer.

Appears if dirt is detected on the heads during
recording. Use an optional cleaning cassette

(

pg. 3)

.

Cleaning The Camcorder

USE CLEANING CASSETTE

USER MAINTENANCE

GR-D790US.book Page 5 Tuesday, November 7, 2006 1:39 PM