ADDITIONAL FEATURES FOR D.S.C.
30 EN
MasterPage: Left

To Print By Selecting Still Images And

Number Of Prints

1Perform steps 1 – 3 in “To Print All Still
Images (One Print For Each)” ( pg. 29).
2Select “CURRENT”,
press SET or 2. The DPOF
screen appears.
3Press 1 or 2 to select
the desired file.
4Press 4 or 3 to select the number indication
(00), and press SET.
5Select the number of prints
by pressing 3 to increase the
number, or 4 to decrease the
number, and press SET.
●Repeat steps 3 through 5
for the desired number of
prints.
●The number of prints can
be set up to 15.
●To correct the number of
prints, select the image
again and change the number.
6Select “RETURN”, press
SET. The “SAVE?”
appears.
●If you did not change any
settings in step 3 through
5, the DPOF Menu
reappears.
7Select “EXECUTE”, press SET.
●To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1Perform steps 1 – 3 in “To Print All Still
Images (One Print For Each)” ( pg. 29).
2Select “RESET”, press SET or 2. The
DPOF screen appears.
3Select “EXECUTE”, press SET.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with “DIS”
de-activated ( pg. 32) this can be avoided.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1Perform steps 1 – 3 in “Normal Playback Of
Images” ( pg. 27).
2Press MENU.
3Select “FORMAT”, press SET
or 2. The FORMAT screen
appears.
●Press 1 whenever you want to
return to the previous menu
screen.
4Select “EXECUTE”,
press SET. The memory
card is initialized.
●When initialization is
finished, “NO IMAGES
STORED” appears.
●To cancel initialization, select “RETURN”.
DPOF
SHEETS
RETURN
02
Select
Select
SET
DPOF
SHEETS
02
DPOF
CANCEL
SAVE?
EXECUTE
Initializing A Memory Card
Select
SET
CANCEL
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
GR-D790US.book Page 30 Tuesday, November 7, 2006 1:39 PM