JVC GR-D790U manual LED Light, EN Features for Recording, Press Slow during recording or playback

36 EN FEATURES FOR RECORDING

LED Light Live Slow

LED Light can be used to brighten the subject in the dark place during video recording or D.S.C. shooting.

LIGHT

LED Light

1 Press LIGHT repeatedly to change the setting.

The light is on always. ( appears.)

The light turns on automatically

when dark. ( appears.)

Turns off the light.

2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image.

NOTES:

●Be careful not to point the LED Light directly to eyes.

●If the light does not reach the subject when the LED Light setting is “ON”, the Night-Alive function will be activated, and makes it possible to shoot the subject brighter.

●Since subjects are shot at a reduced shutter speed when the LED Light setting is “ON”, they will appear slightly blurred.

This feature is useful for recording or playing back precious or hard-to-see moments at a slow speed. Sound is recorded and played back in real time.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “REC” or “PLAY”.

●If set to “REC”, the recording mode should be set to “M”. (
pg. 20)

3 Set “SNAP/SLOW” to “SLOW”. (
pg. 33) The Live Slow indicator “ ” appears.

4 Press SLOW during recording or playback.

●The moving pictures are divided into four frames. They are recorded or played back for 1.5 seconds, and then normal recording or playback resumes.

NOTES:

●This feature is effective when the recording mode selection is set to both “A” or “M”.

●Live Slow cannot be used when the 16:9 Wide mode is selected.