VIDEO PLAYBACK EN 23
1 Make sure all units are turned off.
Connections To A TV Or VCR 2
Connect the camcorder to a TV or VCR as shown in the illustration.
To AV
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
connector 
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
or | 6 Start playback on the camcorder. |
| |
| ( pg. 21) |
Audio/Video cable | ● Please set “16:9 OUTPUT” of Playback Menus |
so that the image may suit your TV (16:9 TV or | |
(provided) | 4:3 TV). ( pg. 34, 35) |
|
TV
VCR
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “ON” or “OFF” ( pg. 35). Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF” ( pg. 35).
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” ( pg. 35).
RECORDING & PLAYBACK
1Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
2Red to AUDIO R IN*
3White to AUDIO L IN*
* Not required for watching still images only.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to“REC”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
