Master Page: Right
—8—
Use an application that can handle the JPEG
file format. To view a still image, double-click
the still image file (extension “.jpg”).
Before loading or unloading memory cards
or turning off the PC, first disconnect the
USB cable and turn off the camcorder.
1Confirm that “ ” is not
currently displayed on the LCD
monitor of the camcorder.
●If “ ” is currently displayed,
wait until it disappears before
proceeding.
2Double-
click the
[Safely
Remove Hardware] or [Unplug
or Eject Hardware] icon in the
status bar.
The [Safely Remove Hardware] or
[Unplug or Eject Hardware] dialog box
appears.
Windows® XP: If not, wait a while then
go to step 5.
3Select [USB Mass Storage
Device] or [USB Disk], and then
click [Stop].
The [Stop a Hardware device] dialog
box appears.
4Click [OK].
Windows® 2000: If a message
indicating that the device can be safely
removed appears, click [OK] and then
click [Close].
*The model name depends on the
connected camcorder.
5Disconnect the USB cable.
6Set the camcorder’s Power
Switch to “OFF”.
The camcorder turns off.
Playing Back Files on the PC (Windows®)
Disconnecting the USB cable (Windows®)
M7D1.book Page 8 Friday, October 20, 2006 12:58 PM