MENUS FOR DETAILED ADJUSTMENT
34 EN
MasterPage: Left
DISPLAYThe “DISPLAY” settings (except “CLOCK
ADJ.”, “16:9 OUTPUT” and “BRIGHT”) are
effective only for shooting.
LCD: Keeps the camcorder’s display (except
the date, time and time code) from appearing
on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
●The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. ( pg. 23, 42)
pg. 15, “Date/Time Settings”
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording. ( pg. 20)
* Available only when the VIDEO/MEMORY
Switch is set to “VIDEO”.
To enable your tv to display images in 16:9
wide mode, set the tv screen size correctly.
4:3 TV: For TV with an aspect ratio of 4:3.
[16:9 TV]: For TV with an aspect ratio of 16:9.
pg. 15, “Brightness Adjustment Of The
Display”
SYSTEMThe “SYSTEM” functions which are set when
the Power Switch is set to “REC” are also
applied when the Power Switch is set to
“PLAY”.
/ / / [ENGLISH] /
FRANCAIS / ESPAÑOL / PORTUGUÊS
The language setting can be changed.
( pg. 14)
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON]: A melody sounds when any operation is
performed. It also activates the shutter sound
effect. ( pg. 26, 37)
OFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
[LCD]: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
●When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “REC”.
●Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for
more than 3 minutes after that, the
demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the
demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
[CANCEL]: Does not reset all settings to the
factory-preset.
EXECUTE: Resets all settings to the factory-
preset.
ON SCREEN
DATE/TIME
CLOCK ADJ.
TIME CODE*
16:9 OUTPUT
BRIGHT
LANGUAGE
MELODY
REMOTE
PRIORITY
DEMO MODE
CAM RESET
GR-D790US.book Page 34 Tuesday, November 7, 2006 1:39 PM