Philips 6863XL manual Brush the slots of the comb

16ENGLISH

C 2 Press the Razor Head Release Button and remove Razor Head Assembly from the razor unit.

C

C

C

3Brush the inside of the razor housing and Razor Head Assembly.

4Turn Razor Head Assembly over so that underside is exposed.

5Turn wheel of frame counterclockwise.

6Remove the frame and brush clean.

7Remove and clean one cutter and comb at

a time.

Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs it could take several weeks before optimal shaving performance is restored.

8Separate the cutter from the comb.

C		Only brush the cutter in an upward
	9
		motion. Use the short bristled side of the
		brush.
C		Brush the slots of the comb.
	10

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid