28ENGLISH
Razor Head Assembly:After Each Use
◗ It is recommended that you clean the Razor Head Assembly thoroughly after each use to maintain optimal shaving performance.
1 Press the on/off button to turn razor ON.
|
| C |
| Rinse Razor Head Assembly under hot |
|
|
| ||
| 2 | |||
|
|
|
| tap water by letting the water run in and |
|
|
|
| around all the openings for at least 30 |
|
|
|
| seconds. |
C 3 You can also immerse the Razor Head Assembly in hot water for at least 30 seconds.
Make sure the razor is ON to thoroughly remove any residue.
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
4Turn razor OFF and shake off excess water.
5You can store the razor in the refill & charge stand.
6Put the Protective Razor Head Cap on razor to protect heads.
Note: If lotion
Razor Head Assembly and soak for a few minutes
ENGLISH 29
under hot water or a degreasing liquid (e.g. alcohol). Be sure to thoroughly rinse Razor Head Assembly under tap water before using razor.
Razor Head Assembly: Once A Month
Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.
|
|
| 1 | Turn razor OFF. |
1 |
| C |
| Remove Razor Head Assembly from razor |
|
|
| ||
| 2 | |||
|
|
|
| by pulling Razor Head Assembly straight |
|
|
|
| up from razor. |
|
|
|
|
|
C3 Using your thumb and forefinger turn the razor head clockwise and lift the comb off of Razor Head Assembly.
4Remove and clean one set of cutters and combs at a time.
Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.
5Separate the cutter from the comb and clean with a small brush or rinse clean under hot water.