Philips 8060X manual Replacing Razor Head Assembly, Maintenance, Storage

Page 18

34ENGLISH

 

C

 

Replace the cap on the top of the bottle

 

 

5

 

 

 

docking station (1) and turn clockwise to

 

 

 

secure the cap (2).

 

 

 

 

Replacing Razor Head Assembly

◗Replace the entire Razor Head Assembly once a year for optimal shaving results.

◗Replace damaged or worn Razor Head Assembly with model HS85 Philips Norelco razor heads only.

C1 Remove the Razor Head Assembly from the razor by pulling the Razor Head

 

Assembly straight up away from the razor.

C

2 Place new Razor Head Assembly back on

 

the razor and push down (you will hear a

 

click).

 

The Razor Head Assembly will only fit correctly

 

in one position on razor. Make sure to align the

 

2 shaving lotion dispensing holes on the Razor

 

Head Assembly with the 2 shaving lotion tubes on

 

the razor.

 

This razor and refill & charge stand have no

 

other user-serviceable parts. For assistance call

 

1-800-243-3050.

ENGLISH 35

Maintenance

◗Always remove razor from the refill & charge stand before cleaning appliance.

◗Unplug the refill & charge stand.The stand may be wiped clean using a damp cloth.

◗Water from the tap should be on a warm setting to clean any washable parts.

Note: DO NOT place or clean any parts of the refill & charge stand in a dishwasher.

Storage

C◗ The razor can be placed in the refill & charge stand for safe storage. If storing razor in refill & charge stand, remove the plug from outlet as soon as the razor is fully charged and refilled with shaving conditioner.

◗If appliance will not be used for an extended period of time, it is recommended that you thoroughly clean the pump unit, Razor Head Assembly and that the shaving conditioner bottle be removed before storing.

◗The razor can be stored in the pouch supplied.The pouch will add extra protection during travel.

◗Be sure razor is turned off. Remove cord from outlet and refill & charge stand before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

◗Do not wrap cord around razor or refill & charge stand when storing.

◗Store cord in a safe location where it will not be cut or damaged.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 8060X 8060X IMportant Safety Instructions Unplug charging stand before cleaningTable of Contents Features Quick Charge Full 2-Year WarrantyRefill & Charge Stand Cap Nivea for MENBefore First Use Power plug transforms 100-240 AC volts to less than 24V DCIntroduction Travel LockBattery Indications During Shaving Razor Charge Indications Low Battery IndicatorFull Battery Indicator Charging IndicationsRazor see also section ‘Low Battery Indicator’ Refill & Charge Stand IndicationsCharging & Filling Razor Recharging requires a full 90 minutes Manual Refilling of Razor CartridgeRecharging Charging plug from outletHow To Shave With Razor Quick ChargePut It To The Test & Shaving Tips To Groom Sideburns and Moustache Growth using both straight and circular motionsTrimming Turn razor OFFTo Use Trimmer To Remove TrimmerTravel Lock Deactivating the travel lock CleaningActivating the travel lock Checking if the razor is locked properlyPress the on/off button to turn razor on Razor Head AssemblyAfter Each UseRazor Head Assembly Once a Month SecondsTrimmerAfter Each Use Pump UnitInsert the hinge at the top of the new Nivea for MEN Shaving Conditioner BottleShaving Conditioner Cartridge Damage to your razorStorage Replacing Razor Head AssemblyMaintenance This razor and refill & charge stand have noAccessories AssistanceOr sink, water or other liquid while plugged
Top Page Image Contents