Philips 8060X manual Refill & Charge Stand Indications, Charging & Filling Razor

Page 9

16ENGLISH

The bottom battery light burns red during shaving when the battery is almost completely empty and blinks red when you turn off

the razor (see also section ‘Low Battery Indicator’)

Refill & Charge Stand Indications

C Shaving Conditioner Bottle Indicator

Light

The shaving conditioner bottle light will blink red when the shaving conditioner bottle is empty or if the bottle has not been placed in the docking hole of the refill & charge stand properly.

The conditioner bottle light will blink red if there is no shaving conditioner bottle in the refill & charge stand docking hole.

See ‘Preparing Refill & Charge Stand for Use’ section for complete instructions.

CShaving Conditioner Cartridge Indicator

Light

When the shaving conditioner cartridge on razor is being filled, the shaving conditioner cartridge light will blink green.

When the shaving conditioner cartridge is filled completely, the shaving conditioner cartridge light will burn green continuously.

If the shaving conditioner bottle runs out while filling the shaving conditioner cartridge,

ENGLISH 17

the green indicator light will turn OFF and the shaving conditioner bottle light will blink red.

Charging & Filling Razor

Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.

Do not leave the refill & charge stand with the razor in it continuously plugged into outlet. If storing razor in stand, remove the plug from outlet as soon as the razor is completely charged and the shaving conditioner cartridge is full.

Do not charge razor in a pouch.

Charging and recharging requires a full 90 minutes.

A fully charged razor has a shaving time of up to 40 minutes.

For hygienic reasons, it is advised that you use a new shaving conditioner cartridge on your razor when starting a new shaving conditioner refill bottle.

1Connect the small plug into the refill & charge stand and put the power plug into any 100V to 240V AC outlet. Use only the cord and refill & charge stand provided.

2Put NIVEA FOR MEN shaving conditioner bottle in docking hole of refill & charge stand (see ‘Preparing Refill & Charge Stand For Use’).

Image 9
Contents 8060X 8060X Unplug charging stand before cleaning IMportant Safety InstructionsTable of Contents Quick Charge Full 2-Year Warranty FeaturesNivea for MEN Refill & Charge Stand CapIntroduction Power plug transforms 100-240 AC volts to less than 24V DCBefore First Use Travel LockFull Battery Indicator Razor Charge Indications Low Battery IndicatorBattery Indications During Shaving Charging IndicationsRazor see also section ‘Low Battery Indicator’ Refill & Charge Stand IndicationsCharging & Filling Razor Recharging Manual Refilling of Razor CartridgeRecharging requires a full 90 minutes Charging plug from outletHow To Shave With Razor Quick ChargePut It To The Test & Shaving Tips Trimming Growth using both straight and circular motionsTo Groom Sideburns and Moustache Turn razor OFFTo Use Trimmer To Remove TrimmerTravel Lock Activating the travel lock CleaningDeactivating the travel lock Checking if the razor is locked properlyRazor Head Assembly Once a Month Razor Head AssemblyAfter Each UsePress the on/off button to turn razor on SecondsPump Unit TrimmerAfter Each UseShaving Conditioner Cartridge Nivea for MEN Shaving Conditioner BottleInsert the hinge at the top of the new Damage to your razorMaintenance Replacing Razor Head AssemblyStorage This razor and refill & charge stand have noAccessories AssistanceOr sink, water or other liquid while plugged