30ENGLISH
6Replace the cutter back onto the Razor Head Assembly making sure the blades are pointing upwards.
C7 Place the razor head comb back onto the
Razor Head Assembly.
Be sure to replace the comb back into the original razor head before cleaning the next set.
C8 Turn the razor head counterclockwise until it locks into place.
9Repeat the process for the other two sets of cutters and combs.
C 10 Replace Razor Head Assembly back on razor and push down (you will hear a click).
The Razor Head Assembly will only fit correctly in one position on razor. Make sure to align the 2 shaving lotion dispensing holes on the Razor Head Assembly with the 2 shaving lotion tubes on the razor.
Trimmer:After Each Use
1Press the on/off button to turn razor ON.
2Rinse the trimmer under hot tap water for at least 30 seconds.
3Turn razor OFF and shake off excess water.
ENGLISH 31
4Lubricate trimmer teeth twice a year with one drop of mineral oil.
5Remove the trimmer and put it back into the trimmer storage compartment on the refill & charge stand.
6Replace Razor Head Assembly back on the razor until it clicks into position.
Pump Unit:
◗It is recommended that you clean the refill & charge stand pump unit each time you replace the shaving conditioner bottle to remove any residual shaving conditioner lotion. This helps to prevent blockage of the pump unit.
1Unplug refill & charge stand. Remove the shaving conditioner bottle and razor from stand.
C2 Remove the panel on the back of the refill & charge stand.
C3 Gently pull the pump unit out from the stand.