Philips 7800XLCC manual LED Charging Indicator, Before First Use, Charging Razor with a Cord

Page 7

12ENGLISH

LED Charging Indicator

C LED Charging Indicator Light

The green Charging Indicator Light will light up to indicate razor is (re)charging.

Before First Use

Charge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.

Important

Only use the power plug or Jet Clean System provided to charge the razor.

The charging plug converts 100 – 240V AC to less than 24V DC.

Charging

Battery performance is best if you recharge only when the batteries are (almost) completely empty.

Charging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.

Continuously recharging or continuously using as a corded razor will reduce life of batteries.

You may also shave using the cord provided. This razor will not recharge while being used corded.

Do not charge/recharge or use razor corded until fully dried.

ENGLISH 13

Charging Razor with a Cord

C 1 Connect cord directly to razor and connect the charging plug into any 100V to 240V AC outlet. Use only the charging plug provided.

An adaptor plug may be necessary for charging plug usage in some foreign countries.

Use an attachment plug adaptor of the proper configuration for the power outlet.

The charging plug will automatically convert to work on 100V to 240V AC systems.

C As you charge razor, the green Charging Indicator light will light up to indicate razor is (re)charging.

2Charging and recharging requires a full 8 hours. A fully charged razor has a cordless shaving time of up to 10 days.

Do not leave the razor continuously plugged into outlet charging as it would reduce the life of batteries. Remove the plug from outlet as soon as the razor is fully charged.

Image 7
Contents Quadra 7800XLCC Save These Instructions Table of Contents Full 2-Year Warranty Day Money-Back Guarantee FeaturesON/OFF Charging Razor with a Cord LED Charging IndicatorBefore First Use ChargingRecharging Charging Razor with Jet Clean SystemPut It To The Test & Shaving Tips Trimming CleaningRemove from the cleaning Preparing Jet Clean System For UsePlace the Jet Clean System on a flat,level surface From the Jet Clean SystemJet Cleaning the Razor Raise the lever holding the razor to Quick Cleaning Razor HeadsRazor from the Jet Clean System Will light up continuouslyAfter Each Use Trimmer Cleaning the Jet Clean CanisterStorage MaintenanceReplacement Heads AccessoriesAssistance Importantes Instrucciones DE Seguridad Dias DE Garantia DE Devolución DEL Dinero Indice de ContenidosCaracterísticas Sistema de Jet Clean Carga la Afeitadora con una Cuerda LED Indicador De CargaAntes Del Primer Uso CargaRecarga La Afeitadora de Carga con Sistema de Jet CleanAféitese en dirección contraria a la del PruebaY Consejos AfeitadoCómo Afeitarse Con Una Afeitador Eléctrica Crecimiento del peloCortapatillas Preparando Sistema de Jet Clean Para el UsoLimpieza Superficie plana, llana Hacia abajo Configuración demostrada dentro delJet Limpieza la Afeitadora Coloque la afeitadora en el lado de laArriba continuamente Rápido Limpieza Conjuntos CortantesLevante la palanca que sostiene la Después de Cado Uso Cortapatillas Mantenimiento Limpieza del Frasco de Jet CleanAsistencia AlmacenamientoAccesorios 4222 002 4644