Philips 7800XLCC manual Maintenance, Storage

Page 14

26ENGLISH

C 3

Discard any remaining cleaning solution in

 

the canister.

The cleaning solution can be safely poured down

the sink as there are no harmful ingredients.

C 4

Simply rinse the canister with warm water.

 

Wipe the canister with a towel or tissue

 

to remove excess water.

C 5

Carefully lower the Jet Clean System over

 

the canister making sure the release

 

buttons snap back into position.

Maintenance

Always remove razor from the Jet Clean System before cleaning appliance.

Unplug the Jet Clean System.The Jet Clean System may be wiped clean using a damp cloth.

Before refilling transparent cleaning reservoir, discard remaining cleaning solution and rinse the outside and inside of the reservoir completely with warm water from the tap.

Water from the tap should be on a warm setting to clean all washable parts.

Note; DO NOT place or clean any parts of the

Jet Clean System in a dishwasher.

ENGLISH 27

Storage

C The razor can be placed in the Jet Clean System for safe storage. If storing razor in Jet Clean System, remove the plug from outlet as soon as the razor is fully charged or cleaned.

If appliance will not be used for an extended period of time, it is recommended that the cleaning solution in both the reservoir and canister be emptied out before storing.

Be sure razor is turned off. Remove cord from outlet and razor or Jet Clean System before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

Do not wrap cord around razor or Jet Clean System when storing.

Store cord in a safe location where it will not be cut or damaged.

Do not keep razor or Jet Clean System permanently plugged into outlet.

Do not place or store razor or Jet Clean System where it can fall or be pulled into a tub or sink, water or other liquid while

plugged in.

C If storing razor outside the Jet Clean System, put the Protective Razor Head Cap on razor to protect heads.

Image 14
Contents Quadra 7800XLCC Save These Instructions Table of Contents Features Full 2-Year Warranty Day Money-Back GuaranteeON/OFF Charging LED Charging IndicatorBefore First Use Charging Razor with a CordPut It To The Test & Shaving Tips Charging Razor with Jet Clean SystemRecharging Cleaning TrimmingFrom the Jet Clean System Preparing Jet Clean System For UsePlace the Jet Clean System on a flat,level surface Remove from the cleaningJet Cleaning the Razor Will light up continuously Quick Cleaning Razor HeadsRazor from the Jet Clean System Raise the lever holding the razor toCleaning the Jet Clean Canister After Each Use TrimmerMaintenance StorageAssistance AccessoriesReplacement Heads Importantes Instrucciones DE Seguridad Indice de Contenidos Dias DE Garantia DE Devolución DEL DineroCaracterísticas Sistema de Jet Clean Carga LED Indicador De CargaAntes Del Primer Uso Carga la Afeitadora con una CuerdaLa Afeitadora de Carga con Sistema de Jet Clean RecargaCrecimiento del pelo PruebaY Consejos AfeitadoCómo Afeitarse Con Una Afeitador Eléctrica Aféitese en dirección contraria a la delLimpieza Preparando Sistema de Jet Clean Para el UsoCortapatillas Superficie plana, llana Coloque la afeitadora en el lado de la Configuración demostrada dentro delJet Limpieza la Afeitadora Hacia abajoLevante la palanca que sostiene la Rápido Limpieza Conjuntos CortantesArriba continuamente Después de Cado Uso Cortapatillas Limpieza del Frasco de Jet Clean MantenimientoAlmacenamiento AsistenciaAccesorios 4222 002 4644