Once a Month Razor Head, After Each Use Trimmer

20ENGLISH

Once A Month: Razor Head

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and lubricated with Philips Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.

After Each Use: Trimmer

1Turn razor OFF.

2Push down spring-release trimmer switch.

C 3	Clean trimmer with the brush every time
	you use it.
C 4	Lubricate the trimmer teeth with Philips
	Norelco Razor Lubricant (model AL80) or
	with one drop of mineral oil every 6
	months.

5Close trimmer by pressing trimmer down.

This razor has no other user-serviceable parts.

Any other service should be performed by the

Philips Norelco Service Location.

ENGLISH 21

Replacing the Razor Heads

◗Replace the razor heads once a year for optimal shaving results.

◗Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only.

Razor head check indication

C ◗ The replacement head indicator light starts blinking to remind you to check if it’s time to replace your razor heads to obtain optimal shaving results.

Storage

◗Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage.

◗Do not wrap cord around razor when storing.

◗Store cord in a safe location where it will not be cut or damaged.

◗Do not keep razor permanently plugged into outlet.

◗Do not place or store razor where it can fall or be pulled into a tub or sink, water or other

liquid while plugged in.

C ◗ Put the Protective Razor Head Cap on razor to protect heads.