Philips 9170XLCC manual Preparing Jet Clean System For Use

Page 13

24ENGLISH

Do not use razor if combs are damaged or broken. Facial injury may occur.

C 1 The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned.

Preparing Jet Clean System For Use

Important

Only use the razor,power plug, Jet Clean System and HQ200 cleaning solution provided to charge or clean razor.

Only use a Philips Norelco ‘XLCC’ model razor with the Jet Clean System.

Other Philips Norelco‘X’,‘XL’ or‘LC’ model razors DO NOT work with a Jet Clean System.

Empty the cleaning solution canister and thoroughly rinse the canister clean with warm water every 2 weeks.

The Jet Clean System thoroughly cleans but does not disinfect your razor, therefore, do not share razor with others.

Thecharging plug converts 100-240VAC to less than 24V DC.

Place the Jet Clean System on a flat, stable surface to avoid any leakage. Be careful not to tip or move the Jet Clean System if it is filled with the cleaning solution.

To avoid evaporation, do not expose cleaning solution to direct sunlight.

ENGLISH 25

Remove the protective razor head cap from the razor before charging or cleaning the razor in the Jet Clean System.

Use this appliance for its intended household use as described in this manual.

1Place the Jet Clean System on a flat,level surface.

C

 

Lift the transparent cleaning reservoir from

2

 

 

 

the Jet Clean System.

 

C

 

Turn the reservoir cap counterclockwise (1)

 

3

 

 

 

and remove from the cleaning reservoir (2).

4Unscrew the lid on the Jet Clean Solution bottle (Model HQ200) provided with the razor. Remove the airtight seal by lifting up the tabs on the seal. Replace lid on the bottle making sure the lid is screwed on securely.

5Open lid and pour the Jet Clean Solution into the transparent cleaning reservoir. The reservoir can be completely filled with one

(1) bottle of the Jet Clean Solution (Model HQ200).Discard cleaning solution bottle after contents have been poured into the reservoir.

NOTE: ONLY USE PHILIPS NORELCO JET

CLEAN SOLUTION (MODEL HQ200)WITH

THE JET CLEAN SYSTEM. ANY OTHER

SOLUTION MAY CAUSE DAMAGE TO YOUR

RAZOR.

Image 13
Contents With Jet Clean System 9170XLCC Save These Instructions Table of Contents Automatic Cleaning Indicator FeaturesFull 2-Year Warranty Day Money-Back Guarantee Easy Read LCD DisplayON/OFF Easy Read LCD Display Battery DisplayDisplay provides the following information LCD DisplayDemonstration Program Seconds Battery EmptyBefore First Use Charge MeterCharging Charging Razor with a CordCharging plug provided Charging Razor with Jet Clean SystemHighest position RazorQuick Charge RechargingPut It To The Test & Shaving Tips Personal Comfort ControlTrimming CleaningJet Clean System Preparing Jet Clean System For UseLever down completely Jet Cleaning the RazorPress the ON/OFF button to start the cleaning cycle Quick Cleaning Razor HeadsRegular cleaning guarantees better shaving results Will light up continuouslyAfter Each Use Trimmer Maintenance Cleaning the Jet Clean CanisterReplacing the Razor Heads Razor head check indicationTravel Lock StorageAssistance To protect headsReplacement Heads Accessories