Philips 9170XLCC manual After Each Use Trimmer

30ENGLISH

C

◗Do not immerse razor in water.

◗The tap symbol on the back of the razor indicates that the razor can be rinsed under running tap water.

1Always turn razor OFF,unplug from outlet and remove cord from razor before cleaning.

ENGLISH 31

C 7	If the shaving unit becomes detached from
	the razor, you can easily reattach it.
8	You may also clean the hair chamber
	without water by using the supplied brush.

After Each Use: Trimmer

C 2	Press the Razor Head Release Button, flip
	open the Razor Head Assembly.
C 3	Clean inside razor heads and hair chamber
	by running under hot water.
C 4	Clean outside of Razor Head Assembly by
	running under hot water.
5	Close the Razor Head Assembly and shake
	off excess water.
C 6	Open Razor Head assembly again and
	leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.

1Turn razor OFF.

2Push down spring-release trimmer switch.

C		Clean trimmer with the brush every time
	3
C		you use it.
		Lubricate the trimmer teeth with Philips
	4
		Norelco Razor Lubricant (model AL80) or
		with one drop of mineral oil every 6
		months.

5Close trimmer by pressing trimmer down.

This razor and Jet Clean System have no other user-serviceable parts. Any other service should be performed by the Philips Norelco Service Location.