6.
TRIMMING
To groom sideburns and moustache:
1Turn razor ON.
2Push up Trimmer Slide Switch.
3 Hold Trimmer as shown and move in downward strokes with gentle pressure.
4Close Trimmer by sliding Trimmer switch down.
5Turn razor OFF.
CLEANING
Once A Week: Razor
1Turn razor OFF (disconnect cord from razor and outlet if using razor corded).
2 Clean the top of the razor with the supplied brush.
3 Remove Razor Head Assembly from the razor unit.
7.
4Brush the inside of housing and Razor Head Assembly.
5Replace the Razor Head Assembly back on to razor.
Every Two Months: Razor Heads
1Turn razor OFF and disconnect from outlet.
2Remove Razor Head Assembly from housing unit.
3Brush the inside of the housing.
4Turn Razor Head Assembly over so that the underside is exposed.
5Press down and turn wheel of frame counterclockwise.
6Remove the frame and brush clean.
7Slide and remove one cutter and head at a time to clean.
•Be careful not to mix up cutters and heads.They are a matched set and if interchanged, it will greatly affect shaving performance.
8Separate the cutter from the head.