EN
RAINFALL
Today's rainfall appears on the 1st line of the display and total rainfall is shown on the 2nd line. Press in /
mmto toggle between inches and millimeters as the unit of measurement.
RAINFALL HISTORY
The rainfall history is displayed on the 1st line of the LCD display. The main unit can record up to 9 days of rainfall.
Use HISTORY to display the record for a particular day. The day of the record will be displayed with a minus
Caution: Other sensors using the 433 MHz transmission frequency may influence the rainfall reading. Please avoid placing those sensors too close to the unit.
TOTAL RAINFALL
The total rainfall is displayed on the 2nd line of the LCD display.
To display the commencing date of the total rainfall record, press SINCE. The date will appear on the 1st line of the display. Press again to show the commencing year.
10
To clear the existing commencing date and reset it to start again, press and hold SINCE. The total rainfall will now be equal to the today rainfall and the unit will start again to collect the rainfall data.
RAINFALLALARM
The rain alarm value can be displayed at any time by pressing (( • )).
To set the rainfall alarm,
1.Press and hold (( • )) for two seconds.
2.Use 
or 
to set the desired value.
3.Press (( • )) to confirm. The alarm will be activated. The rain alarm indicator will light up.
The alarm will go off for one minute when the rainfall reaches the preset value and the rain alarm indicator will flash. A reminder beep will be emitted every minute. Once the rain alarm is on the indicator will not stop flashing unless 
is pressed or the rain alarm value is changed. To stop the alarm and reminder beep, press any button or change the rainfall alarm value.
To deactivate the alarm, press 
.
10 | 4/6/05, 5:46 PM |