Oregon Scientific RGR126 user manual Back View, Wall Mount Hole

Page 3

4.((.)): Displays the rain alarm setting; press and hold to enter the rain alarm setting mode

5.SINCE: Toggles between displaying the start day or start year for total rainfall; press and hold to clear the previous rainfall start time and reset the rainfall counter to start again

6.HISTORY: Toggles between rainfall history and daily rainfall

7. : Enables or disables the rainfall alarm

8.REMOVABLE TABLE STAND: For securing the main unit on a flat surface

BACK VIEW

 

4

1

 

2

5

6

3

 

 

7

 

8

3

EN

1.ANTENNA: Receives radio signal from rain gauge and remote thermo sensor

2. : Increases setting values; press and hold for rapid increase

3. : Decreases setting values; press and hold for rapid decrease

4.WALL MOUNT HOLE

5.TIME / SET: Toggles among the time, day, year and rainfall display; press and hold to enter the time setting mode

6.RESET: Returns all settings to their default values

7.°C / °F BUTTON: Selects between °C and °F

8.BATTERY COMPARTMENT: Accommodates 2 x UM-3 or AA-sized batteries

RGR126(R13)-4(final)

3

4/6/05, 5:46 PM

Image 3
Contents Contents Introduction Product OverviewFront View Wall Mount Hole Back ViewLCD Display Rain Gauge PCR122 LED Indicator Reset hole Channel numberRemote Thermo Sensor THN122N Main Unit Getting StartedThermo Sensor THN122N 05, 546 PM If that fails, check LOW Battery WarningClock / Calendar Setting Data TransmissionRainfall History RainfallalarmTo deactivate the alarm, press RainfallOutdoor TemperatureReset PrecautionsStatement of Responsibility Technical SpecificationsAbout Oregon Scientific FCC Statement Declare that the product Declaration of Conformity