Oregon Scientific RGR126 user manual Thermo Sensor THN122N

3.Put drops of water on the cross at the base to check the leveling.

3

EN

5.Remove the fiber tape from around the bucket assemblies.

1

3 2

4

4.Use the metal ring to adjust the level of the rain gauge.

7

THERMO SENSOR (THN122N)

1.Insert the batteries, matching the polarity (+ and -) as shown in the battery compartment.

2.Set the channel switch to any channel. The switch is located in the battery compartment.

3.Press RESET on the sensor.

4.Close the remote sensor battery compartment.

RGR126(R13)-4(final) 7 4/6/05, 5:46 PM