Fluke VT02, VT04A user manual Rechargeable Battery

Page 14

VT02, VT04A, VT04

Users Manual

Rechargeable Battery

The VT04 has a rechargeable Li-ion battery.

Note

New batteries are not fully charged. Two to ten normal charging/discharging cycles may be required before the battery charges to its maximum capacity.

Before using the VT04 for the first time, charge the battery:

1.Plug the ac power supply into an ac wall outlet.

2.Connect the micro-USB connector to the VT04. See Figure 2.

While the battery is charging, shows on the display and the status

LED is red. When charged, shows on the display and the status LED is green. The typical charge time from 100 % discharged to 100 % charged is 5 to 6 hours.

Note

Make sure the Product is near room temperature before you connect it to the charger. See the charging temperature specification. Do not charge in hot or cold places. Charging in extreme temperatures reduces the battery pack’s ability to hold a charge.

hak18.eps

Figure 2. Rechargeable Battery

Note

Use the micro SD memory card to download images from the Product to a PC. The micro-USB cable is for battery charging only.

6

Image 14

Contents VT02, VT04A, VT04 Limited Warranty and Limitation of Liability Table of Contents VT02, VT04A, VT04 List of Tables VT02, VT04A, VT04 List of Figures VT02, VT04A, VT04 Introduction How to Contact Fluke Safety Information Visual IR Thermometer Before You Start VT04APower On and Off Start-Up Screen and Status IndicatorRechargeable Battery Rechargeable BatteryFeatures and Controls Button Operation Image BlendingVisual Image Alignment Control Visual Image AlignmentCapture and Save Micro SD Memory Card Warning IconsMenu Functions Basic NavigationParameter Adjustment Menu Icons Description VT02 Review Memory EmissivityTemperature Measurement  WarningTemperature Measurement Accuracy On-Screen Comparison of DS Ratio Hot and Cold Markers Reflected Background TemperatureColor Palette Temperature Units Date and TimeHigh/Low Temperature Alarm VT04A, VT04 High/Low Temperature AlarmTime-Lapse Image Capture VT04A, VT04 To set the time-lapseAuto-Monitor Alarm VT04A, VT04 To stop the Auto-Monitor AlarmImage Capture Scenarios for Auto-Monitor Alarm LCD Brightness VT04A, VT04 Factory Reset VT04A, VT04Auto Off VT04A, VT04 BMP File Format VT04A, VT04Measurements Smartview SoftwareMaintenance How to CleanBattery Care   CautionVT02, VT04A Specifications VT04Image Presentation Controls and Adjustments Batteries