Harmar Mobility RPL400, RPL600 manual Down

Page 21

21

Step 1 - Down

Drive onto and stop in the middle of the platform. Apply the brakes of your chair or scooter.

Step 2

Verify that the emergency stop button is not activated by giving it a quick pull out, away from the side of the platform.

Step 3

Press and hold the DOWN rocker. The lift will move in the down direction and stop when it reaches the lower landing.

Warning: Always verify the lift’s access ramp unfolds fully and rests on the ground. If not contact your Harmar Dealer for assistance.

Step 4

Release the brakes on your chair or scooter and drive off the platform.

Image 21

Contents G H L a N D E R Using the Manual Table of ContentsWhen You Receive the Lift SpecificationsSafety Site Requirements Code RequirementsRequired tools Required materialsController Harness Connections Preparing to Install the LiftStep Installing the PlatformInstalling the Outer Guard Panel Installing the Ramp Step Anchoring the LiftSetting the Limit Switches Step Verifying Operation of the Lift Manual Override Top Landing Gate optional EMI Interlock Top Landing EMI Interlock optionalFascia Panel optional Read the manual thoroughly before operating the lift Residential Platform Lift Owners SectionSafety Controls Emergency StopDown Operating the Lift Down How did you hear about Harmar? Purchased my Harmar lift becausePlease rate your satisfaction with your Harmar dealer