6
Installing the Platform
Step 1
The mounting bolts, nuts and spacers that secure the platform to the lift carriage are preinstalled in the carriage flange. Begin by removing these pieces and setting aside.
Step 2
Position the platform by aligning the support legs with the carriage flanges that protrude from the front cover.
Step 3
Align the four mounting holes and insert a ½” x 3” bolt into each hole. The upper holes have a spacer that must be placed in between the carriagne flange and platform leg. Install the locknut on each bolt and tighten sufficiently (approx. 50
Step 4
Plug in the harness for the platform safety pan and unplug the safety pan jumper on the controller (ref pg 5). Secure the harnesses under the clip on top of the carriage flange.