Ingersoll-Rand LCA030SIP3LRU..-E, LCA250QIP3LRN..-E Adjustment Trolley LCA060S to 250Q « LR »

ADJUSTMENT TROLLEY LCA060S TO 250Q « LR »

WARNING

Before installing read "SAFETY INFORMATION", Make sure trolley wheels are compabible with the beam. Tapered wheels are for use only with "I" beams (IPN) ; flat tread wheels are for use only with "H" type beams (IPE).

NOTICE

Trolley wheels ride on the top of the lower flange of the beam.

During assembly lubricate gears, nuts, capscrews, and all machined threads with applicable lubricants. Use of antiseize compound and/or thread lubricant on capscrew and nut threaded areas prevents corrosion.

Adjustment Trolley

Refer.Dwg.D5440207

According to travelling beam used

The adjustment is realized with the distance washer :

2.5-3-3,5 - 5 - 6 - 10 - 15 and 35 mm thick (Rep. 23-26-27-28-35-36-43-52).

1.Stack un the washers as notified on the following sheet.

2.Position the tightening washers Rep. 31.

3.Tighten the nuts Rep. 51 at 110 mdaN.

Tightening washer		Distance	Trolley	Distance	Hoist	Distance	Trolley flange	Distance	Tightening washer
+ nut		washer	flange	washer		washer		washer	+nut
Rolling beam		Additionnal thickness		Thickness of		Thickness of		Additionnal thickness
		of distance washer		distance washer		distance washer		of distance washer
						to make use adjustment		to make use adjustment
IPN 360-143	35+15+10+6+5+3.5+3.5+3+2.5			0		0		2.5+3+3.5+5+6+10+15+35
IPN 400-155	35+15+10+5+3.5+3.5+3+2.5			6		6		2.5+3+3.5+3.5+5+10+15+35
IPN 450-170	35+15+10+3.5+3.5+3			2.5+5+6		6+5+2.5		3+3.5+3.5+10+15+35
IPN 500-180	35+10+5+3.5+3.5+3+2.5			6+15		15+6		2.5+3+3.5+3.5+5+10+35
IPN 550-200	35+6+5+3.5+3+2.5			3.5+10+15		15+10+3.5		2.5+3+3.5+5+6+35
IPN 600-215	35+3.5+3.5+3+2.5			5+6+10+15		15+10+6+5		2.5+3+3.5+3.5+35
IPE 300-150	35+15+10+6+5+3.5+3+2.5			3.5		3.5		2.5+3+3.5+5+6+10+15+35
IPE 330-160	35+15+10+6+3.5+3+2.5			3.5+5		5+3.5		2.5+3+3.5+6+10+15+35
IPE 360-170	35+15+10+3.5+3.5+3			2.5+5+6		6+5+2.5		3+3.5+3.5+10+15+35
IPE 400-180	35+10+6+5+3.5+3+2.5			3.5+15		15+3.5		2.5+3+3.5+5+6+10+35
IPE 450-190	35+10+6+3.5+3+2.5			3.5+5+15		15+5+3.5		2.5+3+3.5+6+10+35
IPE 500-200	35+6+5+3.5+3+2.5			3.5+10+15		15+10+3.5		2.5+3+3.5+5+6+35
IPE 535-210	35+5+3.5+3.5+3			2.5+6+10+15		15+10+6+2.5		3+3.5+3.5+5+35
IPE 600-220	15+10+6+5+3.5+3+2.5			3.5+35		25+3.5		2.5+3+3.5+5+6+10+15
HE 240	15+6+5+3.5+3+2.5			3.5+10+35		35+10+3.5		2.5+3+3.5+5+6+15
HE 248	15+6+3.5+3.5+3			2.5+5+10+35		35+10+5+2.5		3+3.5+3.5+6+15
HE 260	15+3.5+3.5+3			2.5+5+6+10+35		35+10+6+5+2.5		3+3.5+3.5+15
HE 268	6+5+3.5+3.5+3			2.5+10+15+35		35+15+10+2.5		3+3.5+3.5+5+6
HE 280	6+3.5+3+2.5			3.5+5+10+15+35		35+15+10+5+3.5		2.5+3+3.5+6
HE 288	6+5			2.5+3+3.5+3.5+10+15+35		35+15+10+3.5+3.5+3+2.5		5+6
HE 290	3.5+3.5+3			2.5+5+6+10+15+35		35+15+10+6+5+2.5		3+3.5+3.5
HE 300	5			2.5+3+3.5+3.5+6+10+15+35		35+15+10+6+3.5+3.5+2.5		5
HE 305	2.5			3+3.5+3.5+5+6+10+15+35		35+15+10+6+5+3.5+3.5+3		2.5
HE 310	0			2.5+3+3.5+3.5+5+6+10+15+35		35+15+10+6+5+3.5+3.5+3+2.5		0

8