Sharp DK-KP82PH operation manual Using the Radio Data System RDS, Information provided by RDS

Page 17

Using the Radio Data System (RDS)

RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc.

When tuned to an RDS station, “RDS” and the station name will be displayed.

“TP” (Traffic Programme) will appear on the display when the received broadcast carries traffic information, and “TA” (Traffic Announcement) will appear while a traffic information is on air.

“PTYI” (Dynamic PTY Indicator) will appear while the Dynamic PTY station is received.

You can control the RDS by using the buttons on the remote control only.

Information provided by RDS

Each time the RDS DISPLAY button is pressed, the display will switch as follows:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Station name (PS)

Programme type (PTY)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequency

 

Radio text (RT)

When tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order:

No PS

No PTY

FM 98.80 MHz

No RT

Using the Auto Station Programme Memory (ASPM)

While in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored.

If you have already stored some stations in memory, the number of new stations you can store will be less.

1Press the TUNER button on the remote control or FUNCTION button repeatedly on the main unit to select TUNER function.

2Press and hold down the RDS ASPM button on the remote control.

1After “ASPM” has flashed for about 4 seconds, scanning will start (87.50 - 108.00 MHz).

2When an RDS station is found, “RDS” will appear for a short time and the station will be stored in memory.

3After scanning, the number of stations stored in memory will be displayed for 4 seconds, and then “END” will appear for 4 seconds.

To stop the ASPM operation before it is complete:

Press the RDS ASPM button while it is scanning for stations. The stations which are already stored in memory will be kept there.

Notes:

If the same station is broadcasting on different frequencies, the strongest frequency will be stored in memory.

Any station which has the same frequency as the one stored in memory will not be stored.

If 40 stations have already been stored in memory, the scan will be aborted. If you want to redo the ASPM operation, erase the preset memory.

If no station has been stored in memory, “END” will appear for a short while.

If the RDS signals are very weak, station names may not be stored in memory.

The same station name can be stored in different channels.

In a certain area or during certain time periods, the station names may temporarily be different.

Notes for RDS operation

If any of the following events occur, it does not mean that the unit is faulty:

“PS”, “No PS” and a station name appear alternately, and the unit does not operate properly.

If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly.

When you receive an RDS station whose signal is too weak, information like the station name may not be displayed.

“No PS”, “No PTY” or “No RT” will flash for about 5 seconds, and then the frequency will be displayed.

16

Image 17
Contents Special Note DK-KP82PHFM aerial x AccessoriesSpecial Notes Controls and indicators PrecautionsVolume control GeneralDisplay Remote controlWall mount preparation Installing the unitDriving screws Falling preventionDemonstration mode AC power connectionSystem connections Aerial connectionTest of the remote control Remote controlBattery installation General control IPod, iPhone and iPad connection USB only Listening to the iPod, iPhone or iPadIPod, iPhone or iPad playback via USB terminal Made forIPod or iPhone playback IPhone playbackIPod and iPhone connection Dock only Navigating the iPod, iPhone or iPad menusTo disconnect iPod, iPhone or iPad Listening to a CD or MP3/WMA discVarious iPod, iPhone and iPad functions Disc playbackDirect track search Advanced CD or MP3/WMA disc playbackVarious disc functions Repeat playProgrammed play MP3/WMA Random playProgrammed play CD Listening to USB mass storage device/MP3 player Procedure to playback MP3/WMA disc with folder mode onTo play back USB/MP3 player with folder mode off To remove USB memory device To play back USB/MP3 player with folder mode onAdvanced USB playback Listening to the radio Using the Auto Station Programme Memory Aspm Using the Radio Data System RDSInformation provided by RDS To stop the Aspm operation before it is completeIf you select the traffic programme To recall stations in memoryTo specify programmed types and select stations PTY search To confirm the time display To readjust the clockTimer playback Timer and sleep operation Remote control onlyHeadphones Troubleshooting chartEnhancing your system Sleep operationFactory reset, clearing all memory If problem occursCD player TunerSpecifications Maintenance1300 135 Warranty For U.K. and Ireland customers Other Countries outside the EU Terms of Guarantee