![](/images/new-backgrounds/1308845/30884515x1.webp)
General control
■To turn the power on
Press the
After use:
Press the
■Display brightness control
To dim the display brightness, press the DIMMER button on the remote control.
Dimmer 1 (Display is dim). Dimmer 2 (Display gets dimmer). Dimmer Off (Display is bright).
■Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 12 and fades in to the last set level.
■Volume control
Press VOLUME (+ or
■Direct key power on function
When you press any of the following buttons, the unit turns on.
●iPod, CD/USB, AUDIO IN, TUNER on the remote control: Selected function is activated.
●/
button on the main unit: The unit turns on and playback of the last function will start (CD, TUNER, USB, iPod, AUDIO IN)
■Auto power off function
The main unit will enter the
iPod: Not docked.
Audio In: No detection of input signal.
CD: | In the stop mode or no disc. |
USB: | In the stop mode or no media. |
Note:
However, if iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed.
■Muting
The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume.
■X-Bass control
When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and
■Bass control
1� Press the BASS/TREBLE button to select “Bass”.
2� Within 5 seconds, press the VOLUME (+ or
- 5 ↔ - 4........↔ + 4 ↔ + 5
■Treble control
1� Press the BASS/TREBLE button to select “Treble”.
2� Within 5 seconds, press the VOLUME (+ or
- 5 ↔ - 4........↔ + 4 ↔ + 5
■Function
When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.
CD
FM STEREO
FM MONO
AM
Audio In
iPod
USB
Note:
The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected.