Technicolor - Thomson 5302/60 Installation, Mounting the 2-inch viewfinder and microphone holder

Page 5

Installation

Mounting the 2-inch viewfinder and microphone holder

3

 

2

1

5

 

 

4

6

 

To mount the 2-inch viewfinder proceed as follows:

a.Loosenlockingring (1) ofviewfinder supportbracket (2) at the front of the camera handle. (As seen from the rear of the camera, turning the locking ring counterclockwise moves it towards the handle.)

b.Slide the viewfinder onto the viewfinder support bracket.

c.Tighten the locking ring (1) by turning it clockwise (as seen from rear) so that the viewfinder is mounted securely to the support.

d.Connect the viewfinder cable to the viewfinder connector socket (6) at the top right of the camera.

e.Slide the microphone holder (4) onto the viewfinder and secure with the knurled screw (5).

CAUTION

Always fit the microphone holder (4) as it functions as a safety stop for the viewfinder.

f.To improve the comfort of the skin contact when using the viewfinder, fit the eye piece cover (3) to the rubber eyepiece. Spare eye piece covers (3922 405 00461) are available at your Thomson Multimedia Broadcast Solutions representative.

Positioning the 2-inch viewfinder

 

1

 

2

 

3

5

4

The horizontal position of the viewfinder can be adjusted as follows to suit your requirements:

a.Loosen the locking ring (1). (As seen from the rear of the camera, turning the locking ring counterclockwise moves it towards the handle.)

b.Slide the viewfinder horizontally along the rail to the desired position.

c.Tighten the locking ring (1) by turning clockwise.

The dioptre hood and eyepiece of the viewfinder can be rotated vertically.

The viewfinder can be positioned backwards and forwards along the camera axis. Loosen the support bracket round bar retaining lever (2) and slide the round bar (3) forwards or backwards. When the desired position is reached tighten the support bracket round bar retaining lever (2) again.

To use the viewfinder at a distance press the button (4) below or above the eyepiece tube and swing it free of the associated clip (5). The display can now be seen from further away.

02.38.1

User's Guide LDK 5302/60 - 2 Inch HDTV Viewfinder

1-3

Image 5
Contents User’s Guide Declaration of Conformity LDK5302/60 Inch Hdtv Viewfinder Users Guide ContentsAbout This Manual Positioning the 2-inch viewfinder InstallationMounting the 2-inch viewfinder and microphone holder Left eye adapter Wide angle eyepieceMicrophone Operation Viewfinder Indicators Monitoring Functions Tally switch Tally indicators redViewfinder connector Connectors and CablesUsers Guide LDK 5302/60 2 Inch Hdtv Viewfinder 02.38.1